Repair/replace rub-rail

[ep72]

The center piece should be a circular rubber piece (much like a piece of rubber fuel hose). Take a pick or small screw driver and pry it out from the edges. It will just pop right back into place. Once you have the center pulled out a bit you should see where the rail itself is screwed to the top cap.

[Cain Roberts]

The center piece should be a circular rubber piece (much like a piece of rubber fuel hose). Take a pick or small screw driver and pry it out from the edges. It will just pop right back into place. Once you have the center pulled out a bit you should see where the rail itself is screwed to the top cap.

OK, I'll take a look and report back!