Does anybody run a water temp gauge on a 225 OX66???
Does anybody run a water temp gauge on a 225 OX66???
I run one on my 03 250. It don't have any temp readings, But it will only hit the first bar on the gauge. It's the small gauge on the left.
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Mike do you know where the temp. sending unit is on your motor? I put a T fitting where the w/p hose goes and my gauge never goes above 100, wondering if that was the right place to put it. Thanks
If it is anything like the 06 HPDI 250 should be a plug on top of block that goes into the block water jacket that you remove and put the sender in there, mind reads around 129 at wot, at idle it might go up to 145 in hot weather.
WB
12 lbs 9 oz caught on 4/28/1975 Lake Eufaula
I wish I had this gauge instead of the one below (if it would work on my motor)>>> http://cgi.ebay.com/ebaymotors...l1247
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
We have the one bottom with the numbers and my digital number come from the Lowrance network, the small gauge I use for reading the temp mainly.
12 lbs 9 oz caught on 4/28/1975 Lake Eufaula
Reply With Quote
.jpg)
