I just got a 2005 225hp HPDI do you need to use ring free in the HPDI????
Thanks for the help
I just got a 2005 225hp HPDI do you need to use ring free in the HPDI????
Thanks for the help
It's highly recommended. Some guys will also tell you that Sea-Foam is just as good too. I don't doubt that it is, but your Yamaha manual recommends the Ring-Free by name, and I just decided to go with it.![]()
![]()
Thanks for the welcome and the info.........back at you
Sorry, one more question...do you use it at every gas up?
Yes I do. It's real easy to figure. One ounce of Ring-Free per 10-gallons of gas. My tanks are almost exactly 2-gallons per inch of fuel in each of them. I don't worry about the mixture being perfect, just real close to the recommended amount. I often add a little more Ring-Free than necessary.![]()
Thanks again, that just made it real easy for me.![]()
I use ring free a little heavy every gallon of fuel since new it should keep carbon from building up. Enrico![]()
Sea Foam go by the label. works great for me. I have not any problems with starting or fouling plugs.![]()
![]()
![]()
![]()
![]()
![]()
12 lbs 9 oz caught on 4/28/1975 Lake Eufaula
I switched over to Sea Foam earlier this year, after having used Ring Free from the first day I purchased my boat back in 2002. I'm much more impressed with the Sea Foam than I am with the Ring Free. I've been using 3/4th oz. Sea Foam per gallon of gas.
The important thing is to use one of those products every time you purchase gas!
Benjamin Franklin, 1759 - "Democracy is two wolves and a lamb voting what to have for lunch. Liberty is a well armed lamb contesting the vote."
Just curious as I switched over from Black Recently..... how do you calculate sea foam as cheaper when you have to use up to one ounce a gallon and the ring free is one ounce every 10 gallons ? I just cannot get it to compute![]()
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by JeffinFortWorth »</TD></TR><TR><TD CLASS="quote">Just curious as I switched over from Black Recently..... how do you calculate sea foam as cheaper when you have to use up to one ounce a gallon and the ring free is one ounce every 10 gallons ? I just cannot get it to compute</TD></TR></TABLE>
Sea Foam is a lot more expensive than Ring Free at the dose I'm using (3/4th oz. Sea Foam per gallon of gas). But my engine idles SO much smoother than it has in years, and I don't have that black carbon buildup inside the prop cavity area like I always had when I used Ring Free, that I don't mind the extra expense at all.
Now that makes sense..... I just could not figure out the cost savings associated with sea foam due to the lower initial cost, but more dosage per gallon...... Thanks !
Use them both @ one (1) oz per ten (10) gallons of fuel. The sea foam will clean just as good and cost WAY less. I use the one to one (1:1) ratio just after christmas when I take the boat out for the last time.