I got my new boat trailer with a swingaway tounge. Space is not an issue so I will rarely use it but figured I may need it one day and would help with resale. I have heard the storys about punks who like to yank the pins out. What kind of lock would I use to lock it on a EZ Loader?
.
Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO
Kerr Lake Ba$$hole
Neil, I don't know of a lock for that, but maybe someone does. I would carry a spare pin with me anyway for just such an occasion.
Here are the locks I use for towing and storage.
DuraSafe Locks
Stainless steel class III or IV receiver lock (P/N RL888SS)
2-1/2" stainless steel coupler lock (P/N C13SS)
Swing away tongue lock stainless steel (P/N TL001)
Phone 262-544-5615
I purchase all 3 so they were all keyed alike. You can purchase them individually.
I thank the lord above every time I can, I get to be a fisherman
my trailer came with one. It looks just like the pin except it has a D-ring handle and a large washed welded to one end then the lock slips over the other end like some of the receiver locks you see if I find out the brand I will let you know.
I don't leave my pin in the tongue unless I'm pulling the trailer. I throw it on the Driver's seat when I park at the ramp and when I park it at home it goes in a plastic coffee can in the back of my Trailblazer with my other stuff like plug, fishfinder display and keys.
\"Andy\", EM1 USN, Ret.
Disclaimer:
The poster does not take any responsibility for any bad feelings or sense of exclusion that the reader of this post may have-whether real or imagined. Reading threads poses inherent risks. The poster of this comment would like to also remind readers to make sure they have a functional sense of humor before they visit any discussion board.
Everybody has a purpose in life... It\'s just that your sole purpose in life may be to simply serve as a warning to others.
I drilled the keeper pin hole out bigger and use a regular coupler lock in it.
http://www.southwestwheel.com/....aspx
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 285XL »</TD></TR><TR><TD CLASS="quote">I drilled the keeper pin hole out bigger and use a regular coupler lock in it.
http://www.southwestwheel.com/....aspx</TD></TR></TABLE>
Ditto...
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Reply With Quote
.jpg)