Does the alternator normally supply enough voltage on my 2004 250 XS to keep the low voltage buzzer from sounding when trimming up with the engine running ? With my 1000 mca battery fully charged in the morning I dont get any buzzer when trimming.. Approx 3/4 through my tourney I start getting a buzzer when trimming up that goes away a few seconds after I stop trimming. The motor starts fine and my fishfinders don,t blink off and read over 12 volts increasing to 14 volts while running for a while. The motor trims up fine without excess noise or labouring sounds ,but , I get the buzzer while trimming up.. My battery posts are wire brushed shiny and very tight with nyloc nuts ... Where else should I look for what appers to be a faulty connection ?![]()
Modified by canadablazer at 8:47 AM 8/16/2011