im sure that everybody has a tip to put the o ring on a senko but the other day i think on ebay there was somebody selling a aluminum tool to do this for like $15 which is dumb..anyway my tip is take a tube of caulking or silicone and cut the tip off the base make sure that the tip is big enough.. slide the senko in and roll the o ring down it will fall right in the middle...justa little tip 4 ya
The cap off an old sharpie marker works as well!
Thats a good idea. I purchased an aluminum one because it was designed to hold the o-rings at it's base. Therefore I would not have to fumble in my box to get one. I slip the senko in & slide the o-ring on. It's faster for me this way.
Matco Tools Authorized Distributor
2006 Tracker PT175 2005 Mercury 50hp
if you find the right one like a tube of dyamonic it will do the same
Reply With Quote