Anyone with experience with this How do they mount and how hard is it and what wiring does it tie into? Thanks Jim.
Anyone with experience with this How do they mount and how hard is it and what wiring does it tie into? Thanks Jim.
With the exception of a newer product and different packaging, the process is the same. This video will show you the whole thing:
very easy to install, my ranger trailer's wiring runs through a 1/2" tube down the frame rails, even though Mike's LED's have a sticky side to them, I had my guy run the wires through the tube and placed the lights where I wanted them ( on top of tubes ), He then wired both sides to one tail light so it'd be easier to find if or a short. after laying the LED's along and on top the 1/2" tube, He then took and Zip Tied them to the tubing. I'll get some pictures soon as the snow leaves.
Mike,
In the video you have posted where did you get the wheel movers you have on that boat? How much height does it add?
I had a choice either too buy a small tractor just to move boats around or to go with these easy rollers. These were on sale for around $400. You can do a search for go-jacks or easy rollers to find them. Harbor Freight has a cheaper version that I know nothing about. They did end up raising the boat about 4 inches. they also work for cars.
Reply With Quote