Anyone retro fit the hose type rigging for their motor wires. If so how did you secure the hose into the boat side opening? I believe 1 3/4" or 2" would work. I can slip it over the motor housing but I'm not sure how to secure the hose into the boat.
I used shop vac hose. Cost around 20 bucks I zip tied it at the motor and to the rubber boot on the boat.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Jim285pro »</TD></TR><TR><TD CLASS="quote">I used shop vac hose. Cost around 20 bucks I zip tied it at the motor and to the rubber boot on the boat.</TD></TR></TABLE>+1
Where did you get the blue hose??? I'm all over that!
bottom of the page.....
http://www.ultimatewasher.com/...s.htm
found it at Lowes in the plumbimg isle,it's for pool pumps,thought it looked good with the grey boat and black motor
Did you just cut a slit in it and wrap it around? Is it tie wrapped or anything?
Mike at Bunch Marine hooked me up with the Mercury factory kit. He said he has a lot more. The kit is for 2 3/4" hole on the boat and comes with all connectors.
Doc that hose looks way cool. where did you get it? Did you see any in red? I'm so inexperienced at these kinds of things but trying to teach an old dog (me) some new tricks. Would love to put one on my boat (black n red Champion). Any help appreciated
I think there's a Squatch in these woods !
"I rough talked em"
301189
010783
I didn't cut it ,I wanted a complete look so I unhooked all the wiring going into the engine on that side and pulled it through,then re attached all the wiring,no cable ties and fit real snug and tight on both ends. Didn't see any red but wasn't really looking needed blue,I think it matched the motor and boat pretty good.
Who carries the the one you can zip on? It has a long zipper.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by bodady1 »</TD></TR><TR><TD CLASS="quote">Who carries the the one you can zip on? It has a long zipper.</TD></TR></TABLE>
TH Marine http://www.thmarine.com/product.cfm?PRID=101
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
Reply With Quote
[/IMG]
.jpg)
