2008 250 Pro XS Problem

[dc'sZ521]

Ok I need a little bit of smart guy help on this subject. I have a 2008 Pro XS that all of a sudden decided that it doesn't want to have any power coming out of the hole..hole shot is almost gone completely!! To follow this up on the top end I seem to have lost close to 500-600 rpm. Where should I start ? I talked with a good friend who believes it may be a spark plug gone bad.. The last trip out prior to today the motor was running strong, all over 5850-5900 RPM. I did let the boat sit for 2 months with no STAYBILL or any other additive. I did put some fresh gas in this morning and still no difference... I live in central Ga and do not mind driving to have my motor looked at by someone that comes highly recommended!!

Thanks in advance for all comments and post!!

[bloodman]

I'm guessing coil. Very common and could find with timing light. Engine running put timing light on each wire and see if spark.

[EuropeanAM]

A spark test on all six cylinders would be a good starting point.

If you can spare a day.... we'll be glad to try and get you "in and out".

[dc'sZ521]

I could most certainly spare a day.. is this something that is covered under warranty ? Even if its not I obviously need it fixed. Are there any days better than others ??

[EuropeanAM]

I replied to your message.... let me know what day works for you.

Once checked out (to determine what's actually wrong), we'll make a "warranty determination".

In general, "defects in materials or workmanship" are covered.