Valentine's Day Sale on "Manly Bling-Bling MercMonitors" while supplies last....

[EuropeanAM]

Why must the ladies always get the "bling-bling" for Valentines Day?

I've set aside the following units (at the following $20 discounted prices) as a "while this supply lasts through Valentine's Day Sale" on MercMonitors (this way you guys can get some "bling" too):

<U>Standard MercMonitor Kit</U>: Sale Price: $415 (<U>Two Available</U>)

<U>NMEA 2000 "Eco" L1 MercMonitor Kit</U>: Sale Price: $510 (<U>Three Available</U>)

<U>Each kit includes a 20' data cable and gender-bender for installation in a rig never equipped with Smartcraft</U>. Will also sell without cable!

[EuropeanAM]

(2) Standard Kits and (1) NMEA-2000 "Eco" kit remaining.....

[Baja 252]

The Fed Ex man delivered mine today, can't wait to get it all hooked up.

Thanks, Don.

[jignpig_72]

Would these fit in my current cut out on my triton(08 20xhp)? What are the dimensions?

[EuropeanAM]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jignpig_72 &raquo;</TD></TR><TR><TD CLASS="quote">Would these fit in my current cut out on my triton(08 20xhp)? What are the dimensions?</TD></TR></TABLE>

This instrument fits a 3-3/8" opening.

I have also seen them "adapted" to the 5-1/4: opening used in some Tritons....

[jignpig_72]

Where does the cable plug into on the motor? Is it the same place as the little monitor?

[EuropeanAM]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jignpig_72 &raquo;</TD></TR><TR><TD CLASS="quote">Where does the cable plug into on the motor? Is it the same place as the little monitor?</TD></TR></TABLE>

Exactly the same.

[jignpig_72]

do they make a splitter cable? I have the small monitor and would like to keep it since I drilled a hole in my dash.

[EuropeanAM]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jignpig_72 &raquo;</TD></TR><TR><TD CLASS="quote">do they make a splitter cable? I have the small monitor and would like to keep it since I drilled a hole in my dash.</TD></TR></TABLE>

They make a "junction box" (which accomplishes the same thing).

However.... the MercMonitor is meant be be a "stand alone" unit (it will interact with other Smartcraft Instruments.... but wasn't designed to be used with the System Monitor).

Another solution- remove the System Monitor, and install a System "Link" gauge in it's place (can be any gauge you choose).

[jignpig_72]

Can I use the same cable i have now for the system monitor and plug that in the juction box?

[EuropeanAM]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jignpig_72 &raquo;</TD></TR><TR><TD CLASS="quote">Can I use the same cable i have now for the system monitor and plug that in the juction box?</TD></TR></TABLE>

Yes, you can use that data cable. It would need to be plugged into a Junction Box (or the less expensive "gender bender").

[jignpig_72]

Ok, so what would I need to place my monitor with system link temp gauge, and install a mercmonitor. My current cable should work. Also how much would it cost?

[EuropeanAM]

<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by jignpig_72 &raquo;</TD></TR><TR><TD CLASS="quote">Ok, so what would I need to place my monitor with system link temp gauge, and install a mercmonitor. My current cable should work. Also how much would it cost?</TD></TR></TABLE>

How about this: can you give me a call so we can get everything totalled at one time?

We'll need to discuss colors, etc.