Ultrex Quest network issues

[Wayne P.]

Would love to but the displays don't show the motor on the network - as stated.

Fix your Ethernet connection and turn on the power to the trolling motor.

[KC_Bass_Fanatic]

Fix your Ethernet connection and turn on the power to the trolling motor.

Is this a serious reply? The ethernet connection is good, or at least indicates good with blinking amber light at the hub.

[Wayne P.]

Is this a serious reply? The ethernet connection is good, or at least indicates good with blinking amber light at the hub.

You could still have a weak Ethernet connection even though you get the communication indicated by the Switch. Swap some cables around to trouble shoot.

I had the same thing as Steve with the connection getting lose at the top of the motor due to the lock nut rubbing on the coiled cord. I put tape on it to prevent it from happening again. Everything "looked" good but wasn't.

[KC_Bass_Fanatic]

You could still have a weak Ethernet connection even though you get the communication indicated by the Switch. Swap some cables around to trouble shoot.

I had the same thing as Steve with the connection getting lose at the top of the motor due to the lock nut rubbing on the coiled cord. I put tape on it to prevent it from happening again. Everything "looked" good but wasn't.

Thanks Wayne I'll try all the connections