Lowrance Update 25.1 Video and Description of Features

[Marc Marcantonio]

After the update and hard reset, in saving all the pages again to then save them as a clean setting on an SD, I was wondering, is it important to do it with the boat in the water to be able to save the 2 transducers that are installed, one in channel 1 and the other in channel 2, or can I do this operation with the boat dry and put the HDS in simulation mode and proceed to save the 2 transducers, always if in simulation the data entered remain stored.
Another thing, for the GPS antenna "Point-1" I have to recalibrate again right?

You can do it dry, and not in simulation mode; just hit stop sonar on each transducer. You do not have to recalibrate your Point-1 or Ghost if you have one. Follow my YouTube video on how to do a hard reset.

[rob2612]

You can do it dry, and not in simulation mode; just hit stop sonar on each transducer. You do not have to recalibrate your Point-1 or Ghost if you have one. Follow my YouTube video on how to do a hard reset.

Thanks, all doubts removed.
I already follow all your videos with super deserved likes ^_^