Looks like my Crank Position Sensor is damaged.
Any ideas where I can source one?
20250307_115149.jpg
Looks like my Crank Position Sensor is damaged.
Any ideas where I can source one?
20250307_115149.jpg
Twin '05 175 Evinrudes, Model# E175MFXSOS
Found a replacement locally.
Installed, measured air gap @ 0.050 and tried to start.
Pops a few times, sounds like it's gonna start but doesn't.
Original failure of sensor was caused by my error when reinstalling the sensor and not checking the clearance.
It broke the sensor, is it possible something else got damaged? My next step is going to look at the flywheel, assuming that's where the sensor gets the pick-up.
Any thoughts?
Twin '05 175 Evinrudes, Model# E175MFXSOS
Problem solved.
Twin '05 175 Evinrudes, Model# E175MFXSOS
so what was it?Originally Posted by ajv00303
2022 z519 cup 225 merc 4s ser # 3B210484. 2--hds12 live units. 2 poles, atlas plate, ghost, hamby's, active target, merc digital gauges
2002 basscat pantera 3 (dad bought new) sold 8-2-22
2000 stratos 20 ss (bought new) 200 hp Rude ficht great boat/motor sold 11-21
pulled by a 2500HD Denali will all the BANKS upgrades
MAGA 45-47
ASE/GM Master tech before tools
The guy sold me the wrong sensor, found the right one and started right up.
Twin '05 175 Evinrudes, Model# E175MFXSOS
that's frustrating!!
2022 z519 cup 225 merc 4s ser # 3B210484. 2--hds12 live units. 2 poles, atlas plate, ghost, hamby's, active target, merc digital gauges
2002 basscat pantera 3 (dad bought new) sold 8-2-22
2000 stratos 20 ss (bought new) 200 hp Rude ficht great boat/motor sold 11-21
pulled by a 2500HD Denali will all the BANKS upgrades
MAGA 45-47
ASE/GM Master tech before tools
Can't fault the guy. It was used and he thought the one he sold me was correct....he was able to come up with the right one.
Twin '05 175 Evinrudes, Model# E175MFXSOS
Reply With Quote