Results 1 to 7 of 7
  1. #1
    Member
    Join Date
    Feb 2014
    Location
    Elizabethton, TN
    Posts
    447

    Linking 106 and 93

    I have a 93 uhd sv up front for livescope. Just ordered 106 sv and will be makeimgmaking it my livescope unit and leaving the 93 up there too. Few questions. Do I need to link them if they both up front? I’m still running a lowrance at console. My plan is to use the 93 for side/down/sonar/mapping. If I do link can the one lvs34 show livescope on both at same time?
    2004 Stratos 285 Pro XL 150 Johnson

  2. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    34,284
    #2
    If you want to share any waypoints, sonar, etc. then yes, link them. Yes you can view LS on both at same time if you wish to....if you calibrate your LS, then you can mark waypoints with it so thats where the waypoint share comes into play
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  3. Moderator Luke's Avatar
    Join Date
    Oct 2004
    Location
    Sullivan,MO
    Posts
    29,383
    #3
    And jsut remember the 93 will only have 1 network port as the 106 will have 2.
    My suggestion would be to run the livescope network cable to the 106 and then a short network cable (6' is the shortest made) from the other port on the 106 to the 93. Then you can share anything each has to the other.

  4. Member shafer22's Avatar
    Join Date
    Mar 2012
    Location
    Knoxville, Tennessee
    Posts
    2,198
    #4
    Hello. I also have a 106sv at bow with livescope and trolling motor transducer and 93 uhd sv at console with gt54 on transom. Will 1 network cable be enough to connect the 2 units?

  5. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    34,284
    #5
    Quote Originally Posted by shafer22 View Post
    Hello. I also have a 106sv at bow with livescope and trolling motor transducer and 93 uhd sv at console with gt54 on transom. Will 1 network cable be enough to connect the 2 units?
    Yes.....assuming the 93 is not networked to anything....
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS

  6. Member shafer22's Avatar
    Join Date
    Mar 2012
    Location
    Knoxville, Tennessee
    Posts
    2,198
    #6
    i hopefully will be going thru some of the same access holes that i have already made. Do you know any potential problems with that or concerns ?

  7. Lowrance/Garmin/GPS Moderator fishin couillon's Avatar
    Join Date
    Jun 2004
    Location
    Pineville, La
    Posts
    34,284
    #7
    Quote Originally Posted by shafer22 View Post
    i hopefully will be going thru some of the same access holes that i have already made. Do you know any potential problems with that or concerns ?
    Don't know exactly what you have but if other wiring worked then the single network cable shouldn't have an issue.
    YOU are not entitled to what I have earned!!!!!

    2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS