Results 1 to 6 of 6
  1. #1
    165 Custom Baits Hair Jig's Avatar
    Join Date
    Sep 2004
    Location
    Weatherford,TX by way of Chattanooga, TN
    Posts
    4,245

    Advice on this motor ......

    OK all you Merc Gurus ..... what is the story on these HP engines? Here's the situation:

    See the one in the pnoto below? Wellllllll ........

    I don't NEED it,

    I'll never run it hard,

    But I dearly LOVE to hear them run, and I can purchase one that I know is in good condition for a bargain.

    Are they as reliable as a "stock" motor, or do they require more attention and maintenance?

    It is a 1993 year model, and the hours are unknown.


  2. Member
    Join Date
    Sep 2004
    Location
    Brookeland, Texas
    Posts
    3,983
    #2

    Re: Advice on this motor ...... (Hair Jig)

    If its a 260 they are great motor IF they have preventative work done to them, top pinned pistons etc.. It also must be reringed about every 140 hours run time...

    If its a Pro max it too is a great motor and can go 300-500 hours without rebuild but I also suggest top pinning the pistons and up grade con rod bearings !



    Jay
    JSRE
    www.jaysmithracingengines.com
    832 597 2603 cst

  3. 165 Custom Baits Hair Jig's Avatar
    Join Date
    Sep 2004
    Location
    Weatherford,TX by way of Chattanooga, TN
    Posts
    4,245
    #3

    Re: Advice on this motor ...... (JaySmithRacing)

    Thanks Jay.

    I'm not familiar at all with Mercs ... always been an OMC guy. Having been out of the "loop" for several years, I'm trying to get caught up. The owner says this is a 240hp motor? I didn't know that they offered a 240hp with that particular hood.

    I'll see if I can get the serial number ... but in the meantime ... did they offer that engine in 240hp ??

  4. Member
    Join Date
    Sep 2004
    Location
    Brookeland, Texas
    Posts
    3,983
    #4

    Re: Advice on this motor ...... (Hair Jig)

    yes , 245 HP carbed...

    Jay
    JSRE
    www.jaysmithracingengines.com
    832 597 2603 cst

  5. Member
    Join Date
    Jun 2004
    Location
    Fayetteville Tn.
    Posts
    3,556
    #5

    Re: Advice on this motor ...... (JaySmithRacing)

    Them was bad ass little motors!

  6. Member cajunrgfm's Avatar
    Join Date
    Nov 2009
    Location
    Upstate Ny
    Posts
    2,688
    #6
    Yep 2.5 carb hood, 245, thing looks clean, jump on that thing, everybody should have a spare one of those in their livin' room!!

Similar Threads

  1. Need motor Advice!!!!...
    By Franksnbeans in forum Gambler Boats
    Replies: 9
    Last Post: 12-19-2011, 04:20 PM
  2. Need Advice On Motor!
    By Jlang1221 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 07-04-2011, 10:06 AM
  3. The whole story on my motor, need a little advice.
    By imthemedic in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 03-27-2010, 05:14 PM
  4. motor advice
    By joeyd50 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 07-22-2009, 06:46 PM
  5. new motor? need some advice
    By mercury250xs in forum Cobra Boats
    Replies: 4
    Last Post: 07-02-2009, 01:17 PM