Ficht Diagnostic Plug in (on the motor)

[Kenny8906]

I recently bought the software and cable to diagnose issues with my 2001 200 HP Ficht.

Where on the engine is the triangle shaped 3 prong connector to plug the cable into?

Thanks

[ChampioNman]

Behind the flywheel rear right on top of the motor. Key needs to be in the on position for the diags to work.

[Kenny8906]

I see a triangle shaped plug with 3 prongs in that location, it is plugged into another connector, could this be it?

[SEAHORSE]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by Kenny8906 &raquo;</td></tr><tr><td class="quote">I see a triangle shaped plug with 3 prongs in that location, it is plugged into another connector, could this be it? </td></tr></table>

The blank plug is just a holder and a protector for the interface cable connector.

[Kenny8906]

Ok, I'll keep looking then. The plug I thought it was isn't plugged into a blank.

[Danrude]

That is the correct plug, what SEAHORSE is saying is that it serves no other purpose it only has a ground wire attached to it which keeps it from getting lost.