Hey guys, I recently installed 2, 8’ foot blades with the CM2 series pumps, I’m having intermittent problems with the remotes, the two button key fob seems to be the most problematic, it’s hit or miss if they both go down together or one will go down all the way in the other one will stop halfway, the stomp pedals and the four button remote seems to be better, but I can’t say that those are 100% either, the only way that I’ve gotten it to work pretty much every time is with the phone app, but it’s annoying because it keeps disconnecting. I replaced the batteries in
all of the remotes, I called power pole Tech Support and they told me to make sure the antenna had not fallen out of the boards and they have not popped the covers off, then he said something about possible interference inside the boat, this is still happening with everything else turned off and just the Perko switch on sending power to the poles, the radio is off. The ignition is off. There are no depth finders on. Also, the two button remote refuses to work if I am more than three or 4 feet away from the power poles. If I’m on the bow of boat forget it it won’t do anything. Does anybody else experienced this or know what else I can try ? I’m a bit frustrated at the moment. I just spent almost 5 grand on this to replace two talons that were problematic, huge pain in the ass trying to pull your boat up to the dock in the wind and the poles won’t go down.