Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jan 2007
    Location
    Watauga
    Posts
    30

    want to buy new carbs for Intruder 150

    92 Intruder 150, model E150GLENC, SN G 03148785

    Carb bodies are warped and leak, have been "resurfaced" once. Carb part number is 433656.

    Where to get new / replacement carbs? Does anyone sell a "performance" carb for this engine?

  2. Member ELGIN's Avatar
    Join Date
    Sep 2007
    Location
    K-PAX
    Posts
    2,828
    #2

    Re: want to buy new carbs for Intruder 150 (Blu-Ranger)

    The carbs may not be the problem.

    Is your issue the bowl area?

    Have you thought about replacing the bowls?

  3. Member
    Join Date
    Jul 2008
    Location
    RICHMOND
    Posts
    21
    #3

    Re: want to buy new carbs for Intruder 150 (Blu-Ranger)

    Same problem Blu. My 91 FS bodies and bowls warped so much the roll pins holding the return springs on the throttle body shafts were rubbing the back side of the bowls causing a fast idle. They changed this later on so the longer hook side is facing away from the carbs. 91 carb bodies are no longer available through bomb..I purchased some newer non-fast strike carbs on ebay that are ajustable. Plan to try them. I know i'll lose some performce, but maybe better mpg. Keep me posted if you locate any.

Similar Threads

  1. 150 Intruder Carbs ??
    By ryan j in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 03-21-2015, 04:11 AM
  2. 1995 175 intruder carbs not opening all the way
    By hawghunter175 in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 05-02-2011, 04:53 AM
  3. 1997 Intruder Carbs?
    By Stratos282 in forum Evinrude/Johnson Motors
    Replies: 18
    Last Post: 07-01-2008, 08:58 PM
  4. OMC Carbs for 200
    By lkhartwl in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 02-25-2007, 08:48 AM
  5. 95 intruder 150 60 degree Carbs
    By sapnfish in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 08-16-2006, 04:05 PM