Hey guys I have a Motorguide Tour Edition on my 721 and was looking to put a bounce buster on it....however the way the TM was mounted the bounce buster would sit right on my trum between the gunnell and the trim of the carpet. Is there anyway around this like a different way of securing the motor without remounting it. I will try to post a picture so you can see. Didn't know if someone else might have had this problem.
look up rmc boatworks...best thing ever invented to secure ur trolling motors down. all stainless and when it is locked in its solid as a rock. brad is a good guy too! no im not sponsored just a great product
Other option that I have seen is a BIG Ram mount. The ball end is secured to the front deck and the clamp part to the motor. Since it swivels you will be able to get enough play to line it up and secure the trolling motor w/out remounting.
Mark
MARK MADEROS
As you can see no room for a bounce buster.
Maybe have a machine shop custom made a tube with a bend in it.
Mine sits on the trim, as yours would, does not seem to have any negative effects. It has been like that for over a year with no problems. Can post pix if it would help.
I turned my bracket over and adjusted the bumper to sit on the cap. The bracket has an offset to it.
721 PRO XP
250 PRO XS
Atlas Hyd Plate
Can you guys post pics so I can look at them please!
yea thats a problem there, u wouldnt be able to mount the bottom to the floor cause of th clearance. r the all out over the glass like that?
I had that on mine too. I used a big ram mount and connected the ball to the silver cross pin. Its the one that has the rope guide on it. Locked it down big time.
http://content.westmarine.com/...4.jpg
Joe Hall
Lake City, MN
Phoenix 721 XP/ 250 Pro XS
I imagine thats what mine would look like too...I just thought it would be a bad spot for the bouncer to ride.
Reply With Quote
