Thread: Evinrude XP150

Results 1 to 14 of 14
  1. #1
    Member
    Join Date
    Feb 2006
    Location
    Tazewell Tn.
    Posts
    2,696

    Evinrude XP150

    I have an old boat that I used for years, sold the motor. Thinking about getting another motor someday for it. I found this on bbc, 1986 Evinrude XP150, $1500. Model # E150STLCDC, ser. # J1138990, comp. # 85-90 all cyl., new water pump, thermostats, rectifier and plugs. Are these motor's gas hog's? I know that fuel injection is the way to go for fuel economy but I'm not going to spend that kind of money for a newer motor for this old boat. This looks like a good deal to me, but I'm no expert. Also how much does this motor weigh?


    Modified by big_o_tom at 4:18 AM 3/15/2008

  2. Member
    Join Date
    Sep 2006
    Location
    139 Wool Ln Charleston Tn. 37310.
    Posts
    2,080
    #2

    Re: Evinrude XP150 (big_o_tom)

    This is a decent motor, especially for that price. All 2 stroke engines are pretty rough on fuel, especially when in upper R.P.M. range, but all things considered, I think this is pretty fair, if it's clean.

  3. Member
    Join Date
    Sep 2006
    Location
    139 Wool Ln Charleston Tn. 37310.
    Posts
    2,080
    #3

    Re: Evinrude XP150 (gearcaseman)

    Oh yeah, they are @ 370 lbs.

  4. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #4

    Re: Evinrude XP150 (big_o_tom)

    Bought mine in 1985, has a fairly good engine. The only things went bad was the electronic in the past twenty-three years, no mechanical parts went bad. Well the magnets in the flywheel came loose and I had to re-glue them back in place and that was a piece of cake to do. As for being a gas hog, lawd, lawd, yes it is but, it is tolerable if you keep the rpm's down. Your compression is the same as mine. I think it will do the job for you.



    Regards,

    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  5. Member
    Join Date
    Feb 2006
    Location
    Tazewell Tn.
    Posts
    2,696
    #5

    Re: Evinrude XP150 (DoferGofer)

    What kind of boat are you pushing with that 150? Is it heavy?

  6. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #6

    Re: Evinrude XP150 (big_o_tom)



    My boat is a 2003, 19' center console Key West. The boat is 1600 lbs. and accordant to my owners manual my motor weighs 381 lbs. Now I am not sure if that includes the shipping crate or not, just what the spec. sheet says. To see more pictures of my boat, just click on the above link, or click on the link below to see the boat specs.
    http://www.keywestboatsinc.com/boats/1900cc.html

    Hope this helps.



    Regards,





    Modified by DoferGofer at 12:54 PM 3/20/2008
    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  7. Member
    Join Date
    Feb 2006
    Location
    Tazewell Tn.
    Posts
    2,696
    #7

    Re: Evinrude XP150 (DoferGofer)

    Thanks!

  8. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #8

    Re: Evinrude XP150 (big_o_tom)

    What size boat do you have and how much does it weigh?



    Regards,


    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  9. Member
    Join Date
    Dec 2007
    Location
    Fairfield
    Posts
    11
    #9

    Re: Evinrude XP150 (DoferGofer)

    What a clean and great looking boat


    Chris Bilyard
    22\' Glacier Bay 2270 with two DF115 Suzuki\'s
    10\' Merc with BF5
    [/B]

  10. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #10

    Re: Evinrude XP150 (chrisb)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by chrisb &raquo;</TD></TR><TR><TD CLASS="quote">What a clean and great looking boat
    </TD></TR></TABLE>



    Thank you very kindly sir but, all compliments on the looks of that boat must go to my Peetie-pie, she is the one who keeps it clean.
    She spoils me rotten.



    Regards,





    Modified by DoferGofer at 12:55 PM 3/20/2008
    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  11. Member
    Join Date
    Feb 2006
    Location
    Tazewell Tn.
    Posts
    2,696
    #11

    Re: Evinrude XP150 (DoferGofer)

    My old boat is a 17 footer and I think it weighs less than 1000lbs.

  12. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #12

    Re: Evinrude XP150 (big_o_tom)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by big_o_tom &raquo;</TD></TR><TR><TD CLASS="quote">My old boat is a 17 footer and I think it weighs less than 1000lbs. </TD></TR></TABLE>



    That boat should be quick with the XP150. My old 1985 17' Manatee was around 1000 lbs. It would easily run 55-60 with a SST 14 1/4 X 21+ but, my Key West is quite a bit heavier and carries a larger load of fuel and equipment therefore, she is a lot slower at 44-48 and the 48 is on a good day unloaded and the fuel tank on empty with a 14 1/4 X 19.
    Click on the picture to more of the old boat & motor.



    Regards,





    Modified by DoferGofer at 11:27 AM 3/21/2008
    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

  13. Member
    Join Date
    Dec 2007
    Location
    Fairfield
    Posts
    11
    #13

    Re: Evinrude XP150 (DoferGofer)

    She also has great taste in beer!!

    Budwiser!!!



    Chris Bilyard
    22\' Glacier Bay 2270 with two DF115 Suzuki\'s
    10\' Merc with BF5
    [/B]

  14. Member DoferGofer's Avatar
    Join Date
    Jun 2004
    Location
    Edgewood Maryland
    Posts
    1,807
    #14

    Re: Evinrude XP150 (chrisb)

    Birds of a feather flocks together.



    Regards,

    If you can't run with the big dogs, just stay on the porch.

    Model E150DPLIIB, Serial 05311818, Mfg Date 02/2011

    SST... 14 1/2" x 19" 45.0 mph.@4950
    Rebel 15 1/2" x 17" 45.1 mph.@5250
    Rebel 15 1/2" x 16" 44.6 mph.@5300 (Re-pitched/Balanced/Blue Printed by Mark's Props)
    Rebel 15 3/4" x 15" 44.2 mph.@5700-5750

Similar Threads

  1. 1986 evinrude xp150
    By jimmyj3566 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 10-13-2011, 05:38 PM
  2. 1988 Evinrude XP150
    By fattony72 in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 07-09-2009, 06:14 PM
  3. Evinrude xp150 Cowl........Any out there???
    By Liftedpowerstroke in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 04-22-2008, 05:55 PM
  4. 1988 Evinrude XP150
    By Ranger364v in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 06-23-2007, 05:53 PM
  5. 90' Evinrude XP150 Starter??
    By spinabait in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 02-27-2005, 09:16 PM