Are these good engines? Any issues I should be concerned with? What is the maximum rpm for this motor?
Modified by RunOnPad1 at 5:28 PM 9/19/2007
Are these good engines? Any issues I should be concerned with? What is the maximum rpm for this motor?
Modified by RunOnPad1 at 5:28 PM 9/19/2007
Tony Steverson Jr.
I have one with over 400 hrs. and it runs great, I did however have some early warranty work done, a starter and then the stator. Also broke an injector bolt but it had not gotten the updated injector bolt kit installed in time. It is a runner thats for sure. This year I grenaded my lower unit and had to replace it. 7 years running it hard so who knows. Post the model and serial number here and one of the mods can look it up to see the history. 6000 rpm's max, personally I would prop it to run that in the cooler months.
The 2001 Evinrude Brochure to help you out.
CLICK ON THE PICTURE!!
http://rides.webshots.com/albu...rides
================================================== ===
ALWAYS Prop your E-Tec to it\'s OPTIMUM RPM - CHECK yours HERE >> http://www.bbcboards.net/zerothread?id=703860
`````````````````````````````````````````````````` `````````````````````````````````````````````````
DEDICATED to the Preservation of OUR EVINRUDE_JOHNSON_OMC_E-Tec HERITAGE
EVINRUDE CENTENARY YEAR: 1909 > 2009 \"100 years of FUN on the water\"
Sure if it is maintained properly.
Just had the EMM rebuilt.....old age I guess at 300 hours. Runs like great....keep it serviced!!
Tr22 PDC / Rude 225 HO
"Life's Too Short, Don't Sweat The Small Stuff"
Reply With Quote
