lifting ring????rusty?????????

[Luke]

i need to pull the motor off my boat can i buy one of these ? i need to pull the motor cause im out of hight on my JP and i need to go up more

[RUSTY63]

Part number 396748 lifting ring @ $90.42 can be purchased at your local BRP dealer.

[Luke]

wow they are that much
dang i might have to improvise

[RUSTY63]

You drop the motor on you and 90 bucks will seem cheap.

[Luke]

i wont drop it im sure i can find somethin or maybe see if i can borrow one from our BRP dealer i just didnt think that they were that high shows what i know

[RUSTY63]

Luke, its only money....you will make more.

[Luke]

geee thanks john
yea but it likes gas too much and i have to go back to the lake for more runnin with props,,,,,,,,,,,if i can get some to try

[THE WITCHDOCTOR]

make your own.... get a peice of cardboard make a template of the bolts pattern... then lay it out on 1/8" stell plate, cut it, go buy a big cast eye bolt, weld it to the plate and there ya have it... less than 10 bucks.... or I can let u borrow mine.....

[ChampioNman]

I use a harmonic balancer puller that you can get at any auto parts store. Go to Lowe's/ HD and get a eye bolt, 3 5/16th 24 bolts about 3" long large washers, for the bolts and eye ring and screw the bolts into the flywheel. Lift away to your hearts content, plus you can use the puller to remove your Flywheel should you ever need to. CM

[Luke]

thanks guys ill try that
i need to have one anyway especially with tryin to set this thing up if i need to move the motor off again

[DoferGofer]

I done the witchdoctors thang although, I think the Champion N man thingy is the easiest!