I have a 150hp VMax Carb motor and I was on the lake saturday and noticed I had only 3 psi water pressure at idle and at full power only 15psi. I usually have 5 at idle and over 20psi at full power. I do not see any water coming out of the Pee Hole on the side at idle, but at full power there is a little stream. I am getting water out of theexhaust ports as usuall.

I hooked the clean out nozzel to it when I got home and water flow's freely from every were except the Pee hole. I put an air nozzle in the Pee hole to make sure it wasen't pluged and it blew freely. The water temp here is in the mid 70's and the water preesure has worked fine until saturday.

I ran the boat all day saturday and Sunday on St. Clair with no problems so I am getting water, but nothing out of the Pee Hole. Any suggestions??