<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by JDS723 &raquo;</td></tr><tr><td class="quote">Stator is CDI Electronics part #174-9610K 2
Also, each regulator has a grey wire/bullet connector coming from them, which I guess is a ground, one is hooked up and the other isnt. I found nothing for it to hook up too. Should both grey bullet connectors be hooked up to something?</td></tr></table>

That explains the strange colors.

The gray wire is indeed the tach signal wire.... only ONE of the two regulators will be connected to the gray wire.

There should have been an instruction sheet in the box with the stator that explained the wire colors (one of the disadvantages of these aftermarket units is their non-standard wiring).

Here's a link to the install instructions from their website:

http://cdielectronics.com/Inst...2.pdf

Good luck!