Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Jul 2006
    Location
    lafayette
    Posts
    138

    ETEC tach question

    Swapped out merc. for 07 225 ETEC HO---- What is the correct setting on the tach dial??????Quicksilver tach was working fine, seems lately as its off.----will read 7000 rpm's but when motor is hooked to computer the max has been 5800.

    ANY HELP APPRECIATED!!!!!!!!

  2. Moderator SEAHORSE's Avatar
    Join Date
    Jun 2004
    Posts
    9,638
    #2

    Re: ETEC tach question (fisheye58)

    <TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by fisheye58 &raquo;</TD></TR><TR><TD CLASS="quote">Swapped out merc. for 07 225 ETEC HO---- What is the correct setting on the tach dial?????? </TD></TR></TABLE>

    6 pole setting

    If you are using the Merc tach, your dealer did intall the 2" System Check gauge with the 4 warning lights as required for engine warranty, right?
    -----


    A Technical troubleshooter possessing more tools than talent !

  3. Member
    Join Date
    Jul 2006
    Location
    lafayette
    Posts
    138
    #3

    Re: ETEC tach question (SEAHORSE)

    Thanks for the response//He did install the system warning lights.

Similar Threads

  1. will my etec motor run without tach
    By johnson ho in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 07-19-2011, 03:58 AM
  2. Tach reading HIGH on 2007 Etec 200
    By TexaBamaBass in forum Evinrude/Johnson Motors
    Replies: 8
    Last Post: 09-13-2008, 08:25 PM
  3. ETEC 225 HO - Can Ranger Tach be calibrated to match engine RPM?
    By Wild Card in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 09-04-2007, 05:13 PM
  4. TACH Problems on ETEC 225 07'
    By fisheye58 in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 05-29-2007, 12:49 PM
  5. etec SystemCheck Commander Tach - fuel flow management reset?
    By letsgofishing in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 10-02-2006, 10:08 PM