Results 1 to 9 of 9
  1. #1
    Member
    Join Date
    May 2009
    Location
    Park Rapids MN
    Posts
    128

    zx 175 with 175 evinrude intruder 58mph?

    Does this sound about right for this set-up? currently have a 23p tempest on, thought i could get low 60's

  2. Member
    Join Date
    Feb 2006
    Location
    Kaufman
    Posts
    434
    #2

    Re: zx 175 with 175 evinrude intruder 58mph? (zx175'in)

    Sounds slow to me....I had a '94 ZX 175 with a 175 Mariner efi....65-66 loaded...70 empty on the gps...if I remember correctly it had a 23 pitch prop on it...



    ?


    \'06 21i/250 VMax HPDI


  3. Member
    Join Date
    Jun 2010
    Location
    Columbus
    Posts
    30
    #3

    Re: zx 175 with 175 evinrude intruder 58mph? (zx175'in)

    I have a ZX 185 with 150Vmax and can get 61 mph on gps with 2 people and full
    load. u need help.
    Skeeter ZX 185c
    VMAX 150

  4. Member
    Join Date
    May 2010
    Location
    hokes bluff
    Posts
    16
    #4

    Re: zx 175 with 175 evinrude intruder 58mph? (GIG25)

    I have zx175 with 150 mercury 2.5 24 tempest 64 mph with 2 people full of gas

  5. Member
    Join Date
    May 2009
    Location
    Park Rapids MN
    Posts
    128
    #5
    any suggestions, running 5800 rpms at wot

  6. Member
    Join Date
    Feb 2006
    Location
    Kaufman
    Posts
    434
    #6

    Re: (zx175'in)

    Are you getting this speed from the speedo or GPS unit???



    ?


    \'06 21i/250 VMax HPDI


  7. Member
    Join Date
    May 2009
    Location
    Park Rapids MN
    Posts
    128
    #7
    that is with a handheld gps unit, running around 2.5'' below pad

  8. Member
    Join Date
    Feb 2006
    Location
    Kaufman
    Posts
    434
    #8

    Re: (zx175'in)

    Have you made any adjustments on the jackplate...move it up or down....any differnce?? I was thinking mine ran best at around 3" below the pad...if not that then the prop maybe the next step...just have not had any experiences with an Evinrude...



    ?


    \'06 21i/250 VMax HPDI


  9. Member
    Join Date
    May 2009
    Location
    Park Rapids MN
    Posts
    128
    #9
    seems to stay within a mph or 2 when i move it up or down, should i try a 22 pitch or 24?

Similar Threads

  1. Evinrude Intruder 175 HELP!!!
    By FyrFyter33 in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-08-2011, 04:44 AM
  2. 96 evinrude intruder 115
    By asand in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 07-25-2010, 06:50 PM
  3. What can you tell me about a 96 evinrude intruder 150 ?
    By lousyfisher in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 02-14-2010, 05:50 PM
  4. 150/175 evinrude intruder?
    By 185er in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 10-24-2009, 07:36 AM
  5. Selling Price for a 1994 Evinrude Intrder W/ 1994 Evinrude Intruder
    By BassHog007 in forum Stratos/Javelin Boats
    Replies: 3
    Last Post: 06-28-2006, 09:21 AM