Missing !!!

[ranger_138]

I have a 1995 Ranger with the Johnson/Evenrude Intruder motor on it. The other day when I put it it started like a charm trimmed up and planed out but it started missing, with one or two hard misses in it. It done this once last year coming in from a tournament but I thought that it may have been a fouled plug which I checked and did have. I fished last week and it never missed a time. And when I came in from fishing this evening it never missed and I ran it pretty good. So I was just wondering what would make it miss like that, and should keep it off the lake for now, cause I have tournaments coming up this weekend. I have read on here about sensors messed up and powerpacks being bad. I was wanting to find out as soon as I can. Any info is gladly appreciated !!! Thanks Guys
Michael

[jorgeparagon]

http://www.bbcboards.net...04651
This may help.
Have a nice day

[ranger_138]

It is a 1995 Model Evenrude Intruder motor, with no work done on it just little stuff like changing plugs and such. The motor has the Ranger series sticker on it.

[Bassmeister]

Please get your model and serial #'s off the port stern bracket and post for the guys.

[ranger_138]

Here is the numbers:

Model # G03770753
Serial # Eg50GLE0M

I was just wondering if I did have to get a EET and a powerpack, were would be the best place to get them, and about how much will they run ya.

Thanks
Michael