keypad for 2007 210 elite

[tbrowning]

having trouble with keypad above ignition on 2007
210 elite. wondering if someone had a wrecked boat
or one with damage that might sell this part off of.
Or maybe someone could refer me somewhere that
I might could get one. Have big tourney in two weeks
so need one fast. Thanks in advance for any help!

tony browning
tbrowning23@gmail.com

[Lea]

We have a few Champion dealers who are sponsors here on BBC.

AllPro in is AL 256-535-6556,
Freedom Outdoors is in OH toll free 1-866-574-5600,
and Grammer Marine is in AL 205-553-4174

Also might check with Anglers Marine in Anaheim, CA, Reading Boat Works in Reading, PA, Boater's Marine in Monroe, NC and Nichols Marine in Longview TX..they also have a couple of OK locations.

[Todd Morgan]

Megalink is the manufacturer.....Champion had lots of issues with water pouring on the "brain" in the bilge area....and made a rubber mudflap to protect it.

My guy David got to be a pro on the system from all the warranty issues...you can email him with your problem and it may not need to be replaced.

candowarranty@yahoo.com

[Lea]

Thanks, Todd...I messed up by not recommending you first...

[tbrowning]

thanks; will try all and see what I can find out!

[Lea]

Good luck...and let us know. Could help someone else!!!!

[rid 05 198]

mudflap where, to protect what?

Sorry, I'am not following!

[B Holmes]

He is refering to a rubber flap mounted over the top of the megalink wiring junction box located inside the battery compartment.

[SteveDyer]

I was having issues with my touchpad also...I was advised to try disconnecting the cranking battery for 1 min and reset the computer brain. It fixed my issue.

[Hillsreels]

Whew,,,,I like my key!!and the cute float tooo!!

[dvbass]

What exactly is it doing? My bilge lights would go on and off on the pad. It would cause it to lock up where that only way to turn everything off was to push the reset button or disconnect. Turned out to be a bad auto bilge switch that was causing the problem. That was after I was sent 2 different megalinks and 2 switch pads. Make sure all of the harness plugs are seated all the way into the megalink box as well. I was also told to try disconnecting the megalink from the battery. Champion said that gives it a reset.

[Lea]

Good info...thanks!!

[tbrowning]

Talked to Melvin with Champion/Stratos on Tuesday;
received new keypad in mail today in North MS.
Thanks very much, Melvin, and others should call
if help is needed. Very professional and handled
my problem. Thanks again!!

[Lea]

<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by tbrowning &raquo;</td></tr><tr><td class="quote">Talked to Melvin with Champion/Stratos on Tuesday;
received new keypad in mail today in North MS.
Thanks very much, Melvin, and others should call
if help is needed. Very professional and handled
my problem. Thanks again!!</td></tr></table>

Can you post the phone number/contact info for Melvin? Thanks!

[tbrowning]

phone number is 1-615-494-2053;
did not catch Melvin's last name

[Lea]

Thanks. Glad to see they are still answering at the TN facility!!