Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Mar 2006
    Location
    San Jose, CA
    Posts
    96

    Question on those who had recalled springs

    Anyone here have their trailer springs recalled. I have a 2001 single axle trailer which had single leaf springs recalled. 2 years ago, they sent me replacement 4-leaf springs. Right now I'm getting a ton of wear on the outside of my tires from towing. I started a thread in the trailer and towing forum and am wondering if any of my ChamP family has gone through the same situation with their tires and trailer?
    Here's the link (I hope)
    http://www.bbcboards.net...tires

    Any suggestions on what to try next?

  2. Champion Boats Moderator Tx Champ's Avatar
    Join Date
    Jun 2004
    Location
    Abilene, TX
    Posts
    21,166
    #2

    Re: Question on those who had recalled springs (OldMikey)

    Looks like Lyn answered your question. In some of his posts pinned is his toll free number to give him a call. He will shoot straight with you, since it's probably his axle, brakes and hubs under your trailer. Also if your trailer is sqare tubing, it was built by Dri Dock, which is no longer in business. I'm pretty sure they were the trailer manufacturer for ChampioN then. if you have a EZ Loader, then it is preobably a newer trailer. ChampioN's earlier trailers will show to be manufactured by TI, which has been a division of EZ Loader since way back.

Similar Threads

  1. Bay springs
    By b_brock in forum Mississippi Fishing
    Replies: 5
    Last Post: 04-13-2011, 12:52 PM
  2. Question on difference of thermostat springs
    By kro in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 07-07-2010, 06:26 AM
  3. Bay Springs
    By mlusk904 in forum Mississippi Fishing
    Replies: 2
    Last Post: 03-14-2010, 06:37 PM
  4. Bay Springs
    By MD 20i in forum Mississippi
    Replies: 22
    Last Post: 05-13-2008, 08:51 PM
  5. Question on replacing trailer leaf springs
    By Erie660 in forum Trailers & Towing
    Replies: 1
    Last Post: 04-02-2008, 08:42 AM