Min. water pressure for 225 ETEC HO???(Dialing Her IN in THE AM>)

[fisheye58]

Dialing in my 2007 225 HO Etec tommorow--What water pressure should I expect @ WOT---What should be the min??

MY 1st time out--turning a Raker 26-- she turned 5800 rpms @ 69 mph. 1/4 trim, 18 lbs of water----- Trimmed up a little more went to 6100 @ 71 mph and still pulling!!!!--(Didn't have time to fool w/ jack Plate)----- Dropped the Jack plate 1 in. at home to see if I can trim a little more and keep the rpm's in check while getting enough water pressure.

Running Her on a 20'9" Skeeter.

[rudetech1]

Stay around the 5700 rpm range, 12-15 psi at wot. You might need a bit more prop!!! I'm betting on a 28p Raker!!

[fisheye58]

THANKS FOR THE QUICK RESPONSE---I was thinking like you---RAKER 28!!! ANYONE WANT TO BUY A BRAND NEW 26 RAKER!!!(LOL)

[AB]

Yeah, I've turned my 28 Raker2 to 5800 and stopped there, she still had more to go. These things get strong in cold weather.