motor stumbles on take off kind of like its loading up . any ideas on what i might have going wrong its a 2003 250 hp got a phase II kit
motor stumbles on take off kind of like its loading up . any ideas on what i might have going wrong its a 2003 250 hp got a phase II kit
What do your spark plugs look like? Might possibly have a fuel pump diaphragm bad. Changed filters recently (within last 20 hrs)?
spark plugs are new but i havent changed the filters I'll try that and see if it helps ...thank you for responding
also Matt I've read some of your post about the injector cleaning . What is the cost for this ?
Injector cleaning costs $25 per injector, plus the shipping. Turn-around time is 1 day right now.
thanks .is it true that i should mark the injectors so they get returned to the same cly?an if so how is the best way to do this
If you want to keep track of which injector went to each cylinder, marking them would be a good idea. That way if one is acting up, I can tell you "#4 was running lean" or "#6 was sticking open". Might help to diagnose your running issue.
Easiest way to mark them is just use a magic marker when you take them out. The port bank from top to bottom is 2,4,6. And the starboard bank top to bottom is 1,3,5.
I use a small engraving tool when they get here in case the marker wipes off.
ok thanks i'll get back with you when i get time to do this again thanks for responding
Reply With Quote