Results 1 to 3 of 3
  1. #1
    Member
    Join Date
    Aug 2005
    Location
    Greenville NC
    Posts
    4,399

    cracks on 25T1 prop?

    Hey guys, noticed today that all 3 blades on my 25T1 are cracked. They all start at the leading edge, and go about 1/3 of the way across the blade. None of the blades look bent. My prop is almost 5 years, and has scraped/bumped its share of stuff, but is still under warranty through Y.E.S. for another couple of weeks. Is this a valid warranty claim, or do I just need to cough up the $250-$300 to get it repaired/worked?

    Thanks

    Chris

  2. Member Stratos21XL's Avatar
    Join Date
    Jan 2011
    Location
    Tennessee
    Posts
    2,107
    #2

    Re: cracks on 25T1 prop? (chris c)

    if it has cracks on the blade, or even worse..blades, I'd have it looked at for sure, you don't want to sling a blade. It could damage the motor, boat, yourself, or someone else.

    Are you running the motor high on the jackplate or surfacing the prop?

  3. Member
    Join Date
    Aug 2005
    Location
    Greenville NC
    Posts
    4,399
    #3

    Re: cracks on 25T1 prop? (Stratos21XL)

    I'm not running it too high, don't remember what height, but I can turn it 6000rpm's when trimmed out, no more, running 12-16psi. I am going to try to get it replaced under warranty, if not, sending it to Mark.

    Chris

Similar Threads

  1. P175TLRT 25T1 prop fitment question.
    By The Next KVD in forum Yamaha Motors
    Replies: 3
    Last Post: 07-17-2011, 02:26 AM
  2. 27T1 or 25T1 - Which is better...
    By wildkat7 in forum Skeeter Boats
    Replies: 0
    Last Post: 04-22-2009, 01:10 PM
  3. zx225 w/25T1 set-up
    By itsakeeper14 in forum Skeeter Boats
    Replies: 4
    Last Post: 04-20-2009, 07:04 PM
  4. WTB 25T1
    By Beetle in forum Yamaha Motors
    Replies: 0
    Last Post: 05-16-2007, 11:54 AM