Results 1 to 6 of 6
  1. #1
    Member
    Join Date
    Jan 2006
    Location
    Canton
    Posts
    2

    97 Intruder 150 Problem

    It doesn't want to run at the end of the day. I can fish all day and runs great
    decide to quit for the day and it barely gets me to the ramp. I'll start it up
    and it starts missing badly and the rpms jump up to keep it running. try to put it in gear and it stalls. restart and the same thing. Finally after 2 or 3 tries I can get it in gear and start moving as soon as I accelerate it wants to stall so I have to barely accelerate to keep it running and thats it. Basically barely idle back to the ramp. I have had it to one shop on the dyno for 3 hours and it wouldn't act up.
    It did it to 3 times before I put it away. I plan on taking it to another shop but I'm afraid they won't be able to get it to act up either. PLEASE HELP any of you ever seen this before. THANK YOU

  2. Member
    Join Date
    Jun 2004
    Location
    Neenah
    Posts
    3,619
    #2

    Re: 97 Intruder 150 Problem (shiney)

    There is nothing wrong with your motor. I just doesn't want to stop fishing for the day and it is telling you so. Sorry..just had too. My son is the same way. He is fine as long as we are fishing, but he turns into a crab when it is time to go home.

    Welcome aboard.



    Modified \'92 Procraft 170 Combo/\'97 Johnson 130<U></U>

  3. SC Club Moderator ChampioNman's Avatar
    Join Date
    May 2004
    Location
    Crawfordville, FL/Lake Hartwell, SC
    Posts
    72,159
    #3

    Re: 97 Intruder 150 Problem (ProcraftMike)

    Shiney welcome to the boards,
    One or twoor three questions, you running a JP on your boat? Does it fire up first thing in the AM? When it fails to fire after fishing is the motor trimmed down?

  4. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #4

    Re: 97 Intruder 150 Problem (shiney)

    Welcome to the BBC.

    We will need your model number to help answer your question, the model number is on a tag on the swivel bracket.

  5. Member
    Join Date
    Jan 2006
    Location
    Canton
    Posts
    2
    #5

    Re: 97 Intruder 150 Problem

    Thanks for the reply's
    Model # E150GLEUC
    Ser# G04315514
    Jack Plate Yes
    Always fires first thing in the morning only have the problem late in the day.
    Even when it acts up it will fire. But it starts missing and rpms jump up to keep it running. Always trimmed down to start maybe not 100% but down.
    Thanks Again

  6. Member
    Join Date
    May 2004
    Location
    Nashville
    Posts
    11,165
    #6

    Re: 97 Intruder 150 Problem (shiney)

    I would look at the ignition system because you mentioned it starts missing, if all is good there I would look at the fuel system next.

Similar Threads

  1. 175 Intruder Problem
    By tdreib in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 04-10-2011, 06:14 AM
  2. 96 150 intruder problem
    By patches in forum Evinrude/Johnson Motors
    Replies: 0
    Last Post: 06-18-2008, 05:30 PM
  3. Help with Intruder problem.
    By mark482vs in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 11-15-2007, 04:32 AM
  4. Intruder problem here
    By mark482vs in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 11-05-2007, 08:31 AM
  5. Problem with '96 Intruder 150
    By roymunson in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 09-19-2005, 04:48 PM