I've tried to is the pick up on the ProXS down on the front of the nosecone?
Whatever is blocking it, I cannot seem to clear?
Any suggestions where else or what else to try?
I've tried to is the pick up on the ProXS down on the front of the nosecone?
Whatever is blocking it, I cannot seem to clear?
Any suggestions where else or what else to try?
I put the speed on my GPS since I have never been able to get my speedometer work.
George Brock
2015 920 Pro/XP
2015 Mercury 250 Pro/XS
Twin 8' Powerpole Blades
You can sometimes disconnect the black pitot tubing INSIDE the cowling, and attempt to blow into the line that goes down to the gearcase.
If you can't blow through it, there is blockage in the pitot passage in the gearcase (more than likely the case).
I would strongly recommend you have this addressed by a Certfied or Master Technician. The passage is relatively deep, and clearing the blockage often requires careful drilling (exact depth is critical- going too far will ruin the gearcase).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote
