Don,
is it difficult to install a water temperature gauge? i have a '99 opti 225 but have a 2006 factory P/H and ECU.
thanks for any info
scott
Don,
is it difficult to install a water temperature gauge? i have a '99 opti 225 but have a 2006 factory P/H and ECU.
thanks for any info
scott
2000 VIPER COBRA 201D /225 Merc EFI SER: 0T054298
Where does the white go when the snow melts?
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by hookahawg »</TD></TR><TR><TD CLASS="quote">Don,
is it difficult to install a water temperature gauge? i have a '99 opti 225 but have a 2006 factory P/H and ECU.
thanks for any info
scott</TD></TR></TABLE>
If your P/H was a "full dress" unit....
Analog temp gauge can be added, utilizing the TAN wire in the gauge harness (as the sender lead).
Also, you could utilize a Smartcraft Setup (temp is going to be AUTOMATIC in this case). You might consider adding a MercMonitor.... get in touch with me (when you have access to your boat), and I'll help you determine (for certain) that this can be done.
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Don, can you please provide the part number for the gauge??
I never drink water because of the disgusting things that fish do in it.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4dbass »</TD></TR><TR><TD CLASS="quote">Don, can you please provide the part number for the gauge??
</TD></TR></TABLE>
Which gauge.... Analog, or Smartcraft (if Smartcraft, which one)?
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Analog, for a '99 Mariner 225 EFI.
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by 4dbass »</TD></TR><TR><TD CLASS="quote">Analog, for a '99 Mariner 225 EFI.
</TD></TR></TABLE>
Really need some info on your current gauges (if you want to try to make a close match, that is). There's literally DOZENS of possibilities, depending on Manufacturer, face color, bezel color, etc.
You'd be welcome to snap a picture of your dash, and post or email it (address in profile).
Dual Mercury Master Technician- for Mercury Outboards, Mercruiser and Mercury Racing at European Marine in Greenville, SC.
Still consider myself a "Marine Apprentice" after 48 years (learn something new every day).
Mercury Parts, Mercury Outboards, Smartcraft & Accessories, Injector Service, TDR Reeds- BBC Sponsor
Reply With Quote