Results 1 to 5 of 5
  1. #1
    Member
    Join Date
    Nov 2010
    Location
    BURLINGAME
    Posts
    190

    build a 2.5 200 or a 2.5 225 pm

    here is the ? J

    I have two 1998 2.5's a 200 and a 225 PM I want you to "work" one of them. Could you get the same power from the 200 as the 225 PM when your done?
    Is one a better starting point then the other?

    Thanks

    Fishing Is More than Just A Hobby!
    Thanks to
    S & C Environmental Solutions
    http://WWW.TNTBAITS.com
    http://www.BBGMARINE.com/
    http://trattoriacontadina.com/
    http://www.outdoorproshop.com/?Click=10937

    (AKA) Scott Dipman
    1998 Ranger R-93
    2.5L Merc 6\" jack plate

  2. Member
    Join Date
    Sep 2004
    Location
    Brookeland, Texas
    Posts
    3,983
    #2

    Re: build a 2.5 200 or a 2.5 225 pm (ASD)

    I like either but my choice would be the Pro Max because of the front reed induction system 7 verses 5....And the narrow 1.5 MM rings which in stock form WILL make more power..

    Jay
    JSRE
    www.jaysmithracingengines.com
    832 597 2603 cst

  3. Member
    Join Date
    May 2008
    Location
    Dunlap
    Posts
    33
    #3

    Re: build a 2.5 200 or a 2.5 225 pm (ASD)

    Another thing to consider is purpose of the engine......

    In my experiences.... The 5 pedal tends to work well on very heavy bass boats and will have more torque on the bottom and midrange (when compared to engines modified to the same specs with 7 pedal fronts) and are very good up to about 7K. On light hull the 225 will perform great and will mask the lack of bottom/midrange (compared to the 5 pedal) and pull harder in the higher RPM's. Again just my experiences....

  4. Member
    Join Date
    Jun 2008
    Location
    Harriman, TN
    Posts
    528
    #4
    A couple of good opinions from the experts.

    What boat are you going to use it on?

  5. Member
    Join Date
    Nov 2010
    Location
    BURLINGAME
    Posts
    190
    #5

    Re: (ssv1761982)

    Ranger 19'

    Fishing Is More than Just A Hobby!
    Thanks to
    S & C Environmental Solutions
    http://WWW.TNTBAITS.com
    http://www.BBGMARINE.com/
    http://trattoriacontadina.com/
    http://www.outdoorproshop.com/?Click=10937

    (AKA) Scott Dipman
    1998 Ranger R-93
    2.5L Merc 6\" jack plate

Similar Threads

  1. who can build and A rig
    By PII Magnum in forum Rod Building & Tackle Making
    Replies: 12
    Last Post: 12-26-2011, 07:44 AM
  2. First rod build maybe....
    By rolloman in forum Rod Building & Tackle Making
    Replies: 16
    Last Post: 12-21-2011, 01:29 PM
  3. Wish they would build this one
    By iron banks in forum Champion Boats
    Replies: 1
    Last Post: 03-31-2010, 02:08 PM
  4. what do i need to build my rod ???
    By Sprofrog'n in forum Rod Building & Tackle Making
    Replies: 3
    Last Post: 04-07-2009, 07:58 AM
  5. My First Build
    By nektarios in forum Rod Building & Tackle Making
    Replies: 10
    Last Post: 03-30-2009, 07:44 AM