i had problem with the offset on these rims so i bought me some 2" adapters to space the wheel out from rubbing against my inner fender wheel no cut no scrub turned out pretty good i think![]()
i had problem with the offset on these rims so i bought me some 2" adapters to space the wheel out from rubbing against my inner fender wheel no cut no scrub turned out pretty good i think![]()
Bullet 21xrs & xdc![]()
Looks good to me,, keep an eye on those lugnuts .Check them first cpl of trips till those spacers get settled in![]()
Looks good, I'm not a fan of spacers though.
![]()
Marks Props 317-398-9294, 1850 East 225 South, Shelbyville, Indiana 46176 propellerman59@gmail.com http://www.marksprops.com/index.html
yea ive never been a fan of spacers i actually was in the process of cutting the 3/4 plywood and making the shims that me and (21xdc) talked about but as i was making them and measuring them i was running out if room to get the boat on and off the trailer it would have been within centimeters of rubbing the boat so i just decided to go with the spacers and with this being on a boat and not a car i went with them
Bullet 21xrs & xdc![]()
22ft Storm
300+ merc
89.1 mph gps 29TXP 6050rpm
Love those wheels!![]()
I wanna add some new wheels to my 519![]()
What are the widths backspacing and tire size?
the tire size is 255/35r20 not sure exactly what the off set is but i know for sure it wasnt a 0 offset
Bullet 21xrs & xdc![]()
Worked at a tire place for awile growing up, spacers are not a big deal. Looks good! Second the tighten again after pulling it very far...
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by slimshad »</td></tr><tr><td class="quote">Worked at a tire place for awile growing up, spacers are not a big deal. Looks good! Second the tighten again after pulling it very far...</td></tr></table>
Agreed, I have them on the back of my Grand national.. and it has TQ!! Trailers dont. As long as they are adapters w/ lug studs that the wheel , not just spacers you'll be fine.
Greg
06 Stratos 201 ProXL, Yamaha 225
12 Ram 1500 QC Hemi, Dropped 5"+
85 Tidecraft turned mega pond boat
yea they are the adaptors with the studs on them i put some lock tight on the studs going to the trailer hubs![]()
Bullet 21xrs & xdc![]()
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by catch5nRide »</td></tr><tr><td class="quote">yea they are the adaptors with the studs on them i put some lock tight on the studs going to the trailer hubs</td></tr></table>
No problems with wheel spacers..... Even with regular old spacers, as long as you have plenty of thread for the nuts. We used them on our road course race cars. Never the first issue, even at 150mph +!!!!
Wheels look great!!!! Makes me want to spend some more $$$$ on mine!!!