Thread: Lower Unit?

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jun 2005
    Location
    Sour Lake
    Posts
    864

    Lower Unit?

    Hey guys, I pulled the plug on my 96' Eninrude 130 lower unit yesterday and there were some very small magnetized metal shavings sticking out from the end of the plug. is this normal to have or should I be concerned. The boat ran great the last time out but I dont want to get stuck out in the lake with a shot LU. Thanks!

  2. Member Danrude's Avatar
    Join Date
    Apr 2007
    Location
    Marietta, GA
    Posts
    3,579
    #2

    Re: Lower Unit? (swilliford)

    Fine metal shavings are normal. It is the small chunks that would br of concern.
    Dan Burnette - Marietta, GA
    Triton 18TRX - 200 HO G2

  3. Member
    Join Date
    Jun 2005
    Location
    Sour Lake
    Posts
    864
    #3

    Re: Lower Unit? (Danrude)

    Thanks dan, these are very fine, you can see them glitter a little bit in the oil. I plan on draining and replacing the LU oil this week, so hopefully there are no chunks in the bottom!

  4. Member
    Join Date
    Sep 2006
    Location
    139 Wool Ln Charleston Tn. 37310.
    Posts
    2,080
    #4

    Re: Lower Unit? (swilliford)

    If it looks kinda like metallic paint, you're O.K. It's the big chunks that ruin your day!!

Similar Threads

  1. Plastic Covers on Lower Unit - Lower Mounts
    By sethv in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 7
    Last Post: 10-09-2018, 01:28 PM
  2. Lower unit rebuilds? 2000 Mercury 225 Optimax 3.0 lower unit
    By Roger Matthews in forum Missouri Fishing
    Replies: 0
    Last Post: 01-16-2012, 02:51 PM
  3. cleaning the white builup on lower cowl and lower unit
    By dstacey in forum Bassboat Restoration
    Replies: 10
    Last Post: 09-23-2010, 05:57 AM
  4. Mercury 250 Optimax with the torque master lower unit (gray lower unit)
    By Wheeler Lake in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 3
    Last Post: 03-28-2010, 06:11 AM
  5. Metal in lower unit oil/swap to HPDI lower unit
    By hooken203 in forum Yamaha Motors - High Performance
    Replies: 5
    Last Post: 10-09-2009, 02:35 PM