Page 1 of 2 12 LastLast
Results 1 to 20 of 26
  1. #1
    Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69

    BUMPER RAIL ROPE REPLACEMENT

    I was going to replace the rope inside the bumper rail on my recently purchased new to me 1985 375V Ranger but have decided it would nicer to replace it with something like red air line tubing or something similar. Has anyone done something like this and tell what to use (size) and where to get it.



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  2. Member Skeet'r89's Avatar
    Join Date
    Jun 2004
    Location
    North East, Top of the BAY, MD.
    Posts
    7,274
    #2

    Re: BUMPER RAIL ROPE REPLACEMENT (muncher9707)

    Unless you can find any better quality air hose than I have seen in the past couple of years you would be better off using something else. Personnally , I alsays thought the rope looks pretty classy.
    Larry Fitzgerald
    2024 Tracker V-175 /115 Merc
    2021 Silverado/ 4 Banger

  3. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #3
    What type rope and what size. Maybe I can find it in red. Thanks for your input, your opinion is ever so much appreciated.



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  4. Member Skeet'r89's Avatar
    Join Date
    Jun 2004
    Location
    North East, Top of the BAY, MD.
    Posts
    7,274
    #4

    Re: (muncher9707)

    Find yourself a marine supply store(west marine or other) they should be able to hook you up with something. You could pull the end out( from back at the transom) and measure the diameter.
    Larry Fitzgerald
    2024 Tracker V-175 /115 Merc
    2021 Silverado/ 4 Banger

  5. Member
    Join Date
    Jun 2009
    Location
    Tampa
    Posts
    156
    #5

    Re: BUMPER RAIL ROPE REPLACEMENT (Skeet'r89)

    My Stratos 230FS came with a red tube rub rail insert about 3/8 - 7/16 in diameter I understand replacement is available thru a vendor in the Javelin/Stratos section. Look in that section for rub rail insert and find his post.I was going to replace mine but I found only the outside was faded so I turned it inside out.

    1989 361V Johnson 150 GT Fastest boat I have ever owned.
    Found out it scared my fishing buddy so I bought a smaller Stratos with a smaller Johnson

  6. Member
    Join Date
    Sep 2011
    Location
    Merritt Island, FL
    Posts
    365
    #6

    Re: BUMPER RAIL ROPE REPLACEMENT (muncher9707)

    Ive got an 86 395VS I've restored and Im doing exactlly the same thing. It took me a while to find the right material at the right price .....ordered it and I think it will be the right fit...... 1/2 od is what we need for our era Rangers. Should have it early this week....

    http://www.ryderfleetproducts....il.do

    2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0

  7. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #7

    Re: BUMPER RAIL ROPE REPLACEMENT (bwizard)

    I knew someone on here could help me figure this out. Lots of reading but little posting. Let me know how that stuff looks and works. Pics please??



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  8. Member
    Join Date
    Sep 2011
    Location
    Merritt Island, FL
    Posts
    365
    #8

    Re: BUMPER RAIL ROPE REPLACEMENT (muncher9707)

    Roger that..... Shoule be here in a few days, I post a pic for you. Sandbardan made the suggestion to me and I finally found the right material. I mocked up what it would look like with some red ski rope and I think its gonna look awesome.....



    2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0

  9. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #9

    Re: BUMPER RAIL ROPE REPLACEMENT (bwizard)

    That red looks sharp on that white with those letters. I have beige carpet but am betting yours is red. Looking forward to pics. Is it hard to get the rear mounting back together after install? I am almost afraid to take it apart.



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  10. Member
    Join Date
    Sep 2011
    Location
    Merritt Island, FL
    Posts
    365
    #10

    Re: BUMPER RAIL ROPE REPLACEMENT (muncher9707)

    Here is the link to my thread.....you can get a feel for the colors.... http://www.bbcboards.net/zerot...age=4

    2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0

  11. Member
    Join Date
    Sep 2011
    Location
    Merritt Island, FL
    Posts
    365
    #11

    Re: BUMPER RAIL ROPE REPLACEMENT (bwizard)

    Popped in the hose last night....I am very pleased with the stiffness of the hose....It will do its job for certain.







    Modified by bwizard at 8:04 PM 2/10/2012
    2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0

  12. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #12

    Re: BUMPER RAIL ROPE REPLACEMENT (bwizard)

    How much will I need to do an 18' boat. I am thinking around 40 feet??



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  13. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #13
    Looks great



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  14. Member
    Join Date
    Sep 2011
    Location
    Merritt Island, FL
    Posts
    365
    #14

    Re: BUMPER RAIL ROPE REPLACEMENT (muncher9707)

    I would just measure it real quick. You dont want to come up short.



    2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0

  15. Member
    Join Date
    Sep 2011
    Location
    Merritt Island, FL
    Posts
    365
    #15

    Re: BUMPER RAIL ROPE REPLACEMENT (muncher9707)

    Ive got a few feet of the red airline left. How about I ship it to you so you can see how it looks?

    Bill
    2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0

  16. Iowa/Wisconsin/Hunting & Gun Lodge/Stroker Moderator Wags's Avatar
    Join Date
    Jun 2004
    Location
    Camanche Iowa
    Posts
    13,660
    #16

    Re: BUMPER RAIL ROPE REPLACEMENT (bwizard)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by bwizard &raquo;</td></tr><tr><td class="quote">Popped in the hose last night....I am very pleased with the stiffness of the hose....It will do its job for certain.




    &lt;br /&gt;&lt;br /&gt;
    Modified by bwizard at 8:04 PM 2/10/2012</td></tr></table>
    Looks really good
    LeaLea

  17. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #17

    Re: BUMPER RAIL ROPE REPLACEMENT (bwizard)

    roy morris
    705 deer run road
    sylvania, ga 30467



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  18. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #18
    paypal for shipping??



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

  19. Member
    Join Date
    Sep 2011
    Location
    Merritt Island, FL
    Posts
    365
    #19

    Re: (muncher9707)

    Its on me.....
    2018 Z520L 50th Anniversary - 250 Pro XS 2-Stroke SN - 2B527745 / Reman Powerhead Built 8/2021 SN - QSCS00380OS0

  20. Member
    Join Date
    Dec 2011
    Location
    sylvania
    Posts
    69
    #20
    Thanks a bunch bwizard. I am wondering about uneven gaps, how did that work out for you?? Also confused on best carpet.



    Going to church makes you a christian like going to a garage makes you a mechanic

    1985 Ranger 375V
    1985 Johnson GT150

Page 1 of 2 12 LastLast

Similar Threads

  1. Need to replace rope in rub rail!
    By Rader398 in forum Champion Boats
    Replies: 5
    Last Post: 02-05-2012, 05:04 PM
  2. rub rail rope
    By gcopple in forum Bassboat Restoration
    Replies: 10
    Last Post: 07-23-2011, 03:30 AM
  3. Rub rail rope substitute
    By fish in forum Bassboat Restoration
    Replies: 10
    Last Post: 01-17-2011, 03:24 PM
  4. Rope vs vinyl rub rail idea
    By bassin butch in forum Champion Boats
    Replies: 10
    Last Post: 10-28-2009, 08:21 AM
  5. Rope Insert (Rub Rail)
    By ChampionCooper in forum Champion Boats
    Replies: 3
    Last Post: 04-23-2008, 06:31 PM