Results 1 to 6 of 6
  1. #1
    Andy Van Slett
    Join Date
    Jul 2009
    Location
    hartland, wi
    Posts
    37

    Temp for gluing carpet

    what is the minimum working temp for gluing carpet with standard glue and for contact?

    After glued, does the carpet with contact adhesive need to stay at a temp for any amount of time?

  2. Member
    Join Date
    Apr 2009
    Location
    Chiefland Florida
    Posts
    462
    #2

    Re: Temp for gluing carpet (andy van slett)

    I know here in Fl It dosn't like under 65 deg for contact cement I'a doing a javelin right now Just keep an eye on it for wrinkels for a couple of hrs. I got to put it out side today for a while and everything stayed put. Only 2 more lids to go


    Sears Gamefisher 9.9 Johnson 10.1 on GPS

  3. Member
    Join Date
    Dec 2009
    Location
    Proctorville
    Posts
    393
    #3

    Re: Temp for gluing carpet (andy van slett)

    I've done a couple different boats at around 60 degress in my garage without any problems.


    GO STEELERS!!!

  4. Andy Van Slett
    Join Date
    Jul 2009
    Location
    hartland, wi
    Posts
    37
    #4

    Re: Temp for gluing carpet (rutleep)

    to be more specific - it is currently -10degrees. if i heat the garage to 60 degrees, once the carpet is in can I let the garage cool back down or do i need to keep it warm for a few days.

  5. Member Gitzit1179's Avatar
    Join Date
    Nov 2009
    Location
    Upton, MA
    Posts
    274
    #5

    Re: Temp for gluing carpet (andy van slett)

    Read the instructions on your carpet glue container. I re-carpeted mine at 65 F and it worked fine. Lower temps will just take a lot longer to cure.
    Mark M.
    1998 Champion 181 / Mercury 4S 150 hp PRO XS

    "You have two ears and one mouth, use them in those proportions"
    "Eat your breakfast alone, have lunch with friends and give your dinner to the poor"

  6. Member
    Join Date
    Feb 2010
    Location
    evergreen park
    Posts
    964
    #6

    Re: Temp for gluing carpet (andy van slett)

    <table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by andy van slett &raquo;</td></tr><tr><td class="quote">to be more specific - it is currently -10degrees. if i heat the garage to 60 degrees, once the carpet is in can I let the garage cool back down or do i need to keep it warm for a few days.</td></tr></table>no you will need to keep the 60+ temp untill the glue is fully dried

    06 PT190TX
    06 Modified 90 Opti
    80LB Terrova/I-Pilot
    6" CMC Jackplate
    23P Trophy plus
    Lowrance HDS8
    12' Talon

Similar Threads

  1. Gluing in weed guards
    By wilsonlake in forum Rod Building & Tackle Making
    Replies: 6
    Last Post: 01-27-2011, 07:25 PM
  2. Gluing Cork
    By Jake Grey in forum Rod Building & Tackle Making
    Replies: 9
    Last Post: 05-12-2009, 04:07 PM
  3. Gluing crankbait bills??
    By Bassn81 in forum Rod Building & Tackle Making
    Replies: 5
    Last Post: 10-24-2008, 10:59 AM
  4. Re-gluing foam strip on lid seal??
    By TritonMo in forum Bassboat Restoration
    Replies: 0
    Last Post: 03-24-2008, 09:16 AM
  5. Gluing Poppet Valve
    By TBirck in forum Evinrude/Johnson Motors
    Replies: 17
    Last Post: 09-24-2007, 05:02 AM