Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Jul 2006
    Location
    Lakeland
    Posts
    202

    2003 Evinrude FICHT motors


    Guys, could use a little help. Benn a Yamaha guy all my life but looking at a boat with a 2003 Evirude 175 FICHT motor and wanted to know if these are good motors. It has less than 300 hours on it and only been above 5K once, most of it life was in the 3 to 3.5K range. Anything I should look out for?

    Thanks,

  2. Member thebassoutlaw's Avatar
    Join Date
    Jun 2004
    Location
    Broken Arrow
    Posts
    10,810
    #2

    Re: 2003 Evinrude FICHT motors (PF22)

    My 03 150 has been a dream!!! it's got alot more hours on it than that!

  3. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,092
    #3

    Re: 2003 Evinrude FICHT motors (thebassoutlaw)

    The 03 is a BRP DI engine not the Ficht. My 03 225 is a hoss and I love it. As with any DI engine you can help it to last by running a good oil and treating the fuel. I run nothing but the XD-100 oil in mine which keeps the internals clean and treat the fuel with Startron fuel additive to help eliminate ethanol problems. Some run the semi-synthetic oil which is fine, but you need to decarb once yearly or every 100 hours. Hope this helps.

  4. Member
    Join Date
    Dec 2006
    Location
    Cross Plains
    Posts
    127
    #4

    Re: 2003 Evinrude FICHT motors (PF22)

    Have the same motor and love it. PM me and I can tell you more.

Similar Threads

  1. 2003 evinrude ficht question
    By woodys14 in forum Evinrude/Johnson Motors
    Replies: 15
    Last Post: 03-27-2012, 04:05 AM
  2. Evinrude 2003 225 Ficht H.O.
    By champ203rude in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 03-13-2011, 03:41 PM
  3. 2003 evinrude 225 ficht want start
    By stratosfiedss20 in forum Evinrude/Johnson Motors
    Replies: 5
    Last Post: 03-10-2010, 07:36 AM
  4. 2003 250hp EVINRUDE FICHT ?????????
    By KERZ in forum Evinrude/Johnson Motors
    Replies: 4
    Last Post: 02-06-2007, 06:32 PM