ok, i am getting blanks, eva split grips, 2 piece reels seats, and guides from swampland tackle....
what all do i need to complete this rod these rods:
I need a list of the stuff i need and where to get it !!!!!
ok, i am getting blanks, eva split grips, 2 piece reels seats, and guides from swampland tackle....
what all do i need to complete this rod these rods:
I need a list of the stuff i need and where to get it !!!!!
U-40 Rod Bond
Thread
Guide Finish (i recomend Thread Master or Flex Coat)
3-6 rpm drying motor setup (ebay)
something to wrap on - you can get a standard wrapper setup on ebay or mudhole with thread tensioners for around 50$. They are also easy to make yourself. You can also use a cardboard box with "V" notches cut into it and run your thread through a phone book for tension.
don't forget the hook keeper - swampland has them also.
thank you for the help so im sure mudhole and swampland have all this stuff, im building my own rod holder and wrapper and have a motor for turning!!!
you can ask swampland - not sure if he carries finish or rod-bond. Mud hole will have it, however.
Reply With Quote