Any of you boys try this clear top coat?

[21XDC]

"Seal-Coat Lure and Jig Finish
The TOUGHEST finish ever put on a lure. This one-step system is as strong as epoxy without the measuring, mixing and smell. This finish has an extreme durability, a deep gloss, is non-yellowing, fast-drying and worm proof. "

http://www.upnorthoutdoors.com....html

http://www.do-itmolds.com/prodpaint.aspx?c=170



http://www.cabelas.com/cabelas...src=1

[203]

I also saw it at BPS the other night. It is the consistency of warm molasses. Lots of nice colors too, but too thick to spray...

[21XDC]

You should be able to thin it with water. Most guys thin their product if they spray it anyway..... Not sure this is the same as BPS... I didn't think it came in colors.

http://www.jannsnetcraft.com/f....aspx

[203]

Same name, logo with the jig and all. I was suprised, as it is a new addition there. They had about 8-10 sq feet of rack space in the make it yourself section of our BPS devoted to that product. The clear really caught my eye, something easier than epoxy...

But I did not catch what thinned it, or what cleaned it up. Nor did I buy any, but I will be back there next tuesday and will look at it more. The colors were real neat.

[21XDC]

Is this what your talking about? Dip or markers? http://www.cabelas.com/cabelas...43716
Not sure if this is meant to paint on... Looks like just a dip it thing, or markers.

[203]

Checked around the web a bit, there's a good chance that this is what I saw..

http://www.csipaint.com/vinylpaint.htm




Modified by Fish'n fer fun at 7:38 AM 10/28/2007

[21XDC]

OK... Thats not the same brand or type of paint. I used to buy that CSI paint by the gallon. Infact I think alot of it has probably gone bad. That stuff was expensive especially when you pay a has mat delivery charge.

[Ky 520c]

Not to hi-jack your thread Mike but you may want to try this http://www.dicknite.com/s81.htm I got away from Devcon awhile back, I didnt like the additional weight plus it has a yellow tint it added to my cranks plus the one parts are so much easier to use, dicknite's is a one part moisture cured polyurethane that can be sprayed or dipped or brushed it's gin clear and drys rock hard. There is another company in Canada I think called "top secret" that also makes one part coatings that alot of builders are having success with top secret->http://www.topsecretcoatings.com/



Modified by Ky 521 at 5:57 AM 10/29/2007

[21XDC]

Thanks... I was just passing on this new stuff thats water based and may be better in a air sprayer, Or just wash up with water. It may be junk..

If you only bought one of the links you posted, What one would it be? I can buy outside weather resistant/waterproof exterior clear coat in a can at Lowes/Home Depot.... I also looked at epoxy floor coatings in gallons on line... I'm just playing around..

[Ky 520c]

The dick nites is all I have experience with and I love it,I think the topsecret is probably real close

[egandy]

Second the Dick Nights

http://www.dicknite.com/descript.htm#lcpl