Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Apr 2008
    Location
    Austin
    Posts
    643

    1988 115hp Johnson motor

    Looking at a used boat with a 1988 115 hp Johnson motor. I dont have the serial number or model number. What are your opinions of this motor, in general. Should I keep looking or will this be a servicable motor with proper maintenance, etc.?

    Thanks!

  2. Sprint Boats Moderator Bassmeister's Avatar
    Join Date
    May 2004
    Location
    Calhoun, Ga.
    Posts
    47,083
    #2

    Re: 1988 115hp Johnson motor (Acuna)

    Those old 4 bangers were good motors. As with any used motors, check compression and a leakdown would be advisable. If the motor hasn't been run in a while the carbs may need to be cleaned. Also check lower unit oil for water intrusion,line around prop etc. Good luck! I had a78 85 hp that was running great when I sold it.

  3. Member
    Join Date
    Jan 2008
    Location
    Anderson
    Posts
    169
    #3

    Re: 1988 115hp Johnson motor (Acuna)

    May want to check the model number again, didn't think they made a 115hp in 1988 but either way, I have a 1988 Johnson 110 V4. No issues at all, ever. VRO is still hooked up, very reliable motor. As already said, just check the basic, water in gear oil, compression, etc..

    my .02.

  4. Member
    Join Date
    Nov 2005
    Location
    Dalton
    Posts
    2,575
    #4

    Re: 1988 115hp Johnson motor (BESman)

    My 120 johnson is an 1988 model. Its been very good to me.



Similar Threads

  1. 1995 Johnson: 115HP Oil
    By JimDi in forum Evinrude/Johnson Motors
    Replies: 1
    Last Post: 03-21-2012, 01:33 PM
  2. 1992 johnson 115hp bubble back motor?
    By DTW2 in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 02-13-2010, 09:35 PM
  3. 99 Johnson 115HP two issues
    By KABPI in forum Evinrude/Johnson Motors
    Replies: 2
    Last Post: 08-19-2008, 06:26 AM
  4. Replies: 4
    Last Post: 08-20-2006, 06:59 PM
  5. Tilt on 2004 115HP Johnson won't go all the way up
    By wasabi in forum Evinrude/Johnson Motors
    Replies: 3
    Last Post: 06-06-2005, 07:31 PM