Thread: confort troll

Results 1 to 6 of 6
  1. #1
    Member rjvana's Avatar
    Join Date
    Jun 2011
    Location
    Folsom
    Posts
    2,287

    confort troll

    Hi everyone,
    I have a 1996 Skeeter200zx and would like to know if anyone out there has installed a comfort trol foot petal .If so was there any problems on this model boat. Any help will be greatly appreciated.
    Ray Vanacore

  2. Member
    Join Date
    Jun 2005
    Location
    Galt, California
    Posts
    172
    #2

    Re: confort troll (rjvana)

    Hello Ray,

    I installed one on my ZX225 this past summer and like it. After using it for a while now it really helps out your back. The only problem that I had was that I was scared to cut the hole in the deck.


  3. Member
    Join Date
    Sep 2011
    Location
    Gainesville, VA
    Posts
    571
    #3

    Re: confort troll (rjvana)

    I have an 04' 190 and I just installed a pro control. The job is going to be the same. Once you get the nerve to cut the hole in your deck, it is really a pretty simple job. I used a sawzall to cut through deck. I ran into one 2x4 brace that I had to cut through. The deck is still rock solid. I'm not sure why Skeeter put the brace where it was. Just make sure you measure twice and cut away. I also filled in around the styro foam with epoxy resin to waterproof everything.
    2018 Skeeter ZX250
    2018 Yamaha SHO 250

  4. Banned
    Join Date
    May 2011
    Location
    orange county
    Posts
    114
    #4

    Re: confort troll (rjvana)

    I have an 04 TZX 200. Just installed the comfort troll with no problems. Depending on how far forward you place the tray will determine how much of the brace you end up cutting.

    My tray front is 2 1/4" from bow carpet edge. I had to cut very little amount of brace.

    Just make sure you mount it straight so you dont look like a donkey.

    Definitely a good purchase. Already feels better on my back after a long day.


  5. Member
    Join Date
    May 2010
    Location
    orlando, florida
    Posts
    246
    #5
    I have a 95 zx200 and had no problems with putting one in. I would assume that the boat is the same as mine being only one year different, I dont think there were any changes int he deck. Just make sure you mark it correctly, the first cut is the worst (kind of scary cutting into your deck). Keep in mind of your seat post location as it is close to the front, if you use your seat pole it can be kind of close.


    2005 Ranger Z21
    Mercury 250 xs

  6. Member Dando's Avatar
    Join Date
    Dec 2007
    Location
    Lamar, AR
    Posts
    30,278
    #6

    Re: (nacoa)

    I don't like my TM pedal direct center. I prefer it slightly to the left, and then pointed about 11:00.
    After I layed out my well on the deck to mark it prior to cutting. My thought was HOLY SCHIT WHAT A HOLE!!

    I couldn't go thru with it.
    When it comes time to re-carpet, I'll fabricate a well just the right size, integrated, fiberglass, and carpetted, and....about 2" shallower than the metal one I bought.
    To me, being down in a hole is worse than Captain Morganing it. I think I could deal with a happy medium much better.
    I think the new secret color is "A-Rig"..........

Similar Threads

  1. Troll Well or not?
    By DuncanBassFishing in forum Ranger Boats
    Replies: 5
    Last Post: 03-11-2012, 10:47 AM
  2. new troll eze
    By ezmuny13 in forum Boat & Trailer Bling
    Replies: 19
    Last Post: 06-15-2010, 05:06 PM
  3. Let me troll this through
    By goose in forum Maryland
    Replies: 2
    Last Post: 07-12-2007, 04:19 PM