I have a 2005 zx225 with a yamaha 225 hpdi on the back and i running a 3 blade 27 cant seem to get over 5300 rpm. if you have a zx225 please let me know what prop you are using.
Thanks
jim cav
I have a 2005 zx225 with a yamaha 225 hpdi on the back and i running a 3 blade 27 cant seem to get over 5300 rpm. if you have a zx225 please let me know what prop you are using.
Thanks
jim cav
I have a 200 HPDI with a 25M and I'm turning 5500. I think most 225 have 25 pitch props.
the zx225 should have a Yamaha 25 T1 on it. someone changed the prop or didn't put the right one on it.
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by bass-coach »</td></tr><tr><td class="quote">the zx225 should have a Yamaha 25 T1 on it. someone changed the prop or didn't put the right one on it.
</td></tr></table>
My 01 zx225 with VMAX 225 ox66 came with a 27T1 Prop from factory.
that ox motor may have been different enough that it would pull a 27. Any '07 or newer zx225 that i have seen come through our dealer has had the 25 on them. Maybe the HPDI needs a little less prop. they put them on the 20I with the 250 HPDI also.
08 zx225 has the factory 25 yamaha if i rembember right 6100 rpm by my self 72mph 2 guys laoded 69-70 mph gps
02 SX200, Merc 200xri, 26tempest plus=74 solo, 70 loaded 2people.
I have a 02 zx225 with a 225 ox66 im running a 27t on it and it runs great. Jumps on plane and hulls a**
73mph at 5900rpm
The ox66 does run stronger tho..
My ZX250 came with a 27T-1, with a heavy load I could only turn it to 54-5500. I tried a 27 Fury, 26 Fury and Tempest. I am now running a 25 T-1, very happy with it, no need to try anything else for me.
.
Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO
Kerr Lake Ba$$hole
Neil, i find that interesting. My '08 came with the 27 T1 and my max rpm's are about 5900 in February to about 5800 or a little under in the hot months. that is with it loaded too.
Currently a T1-27P turning at 5650 light load will do 72GPS... tourney load and 2 guys runs 70.5 all the time. 26P TXP on the way which should turn a few more rpms![]()
My T1-25P would turn over 6000rpm and i lost on the top end no matter what height the jp was set to so it's sold.
Current: 2006 ~ 20i ~ 250 HPDI ~ T1-25p
Previous: 2005 ~ ZX 225 ~ 250 HPDI Phase III - TXP 26p
<table width="90%" cellspacing=0 cellpadding=0 align=center><tr><td>Quote, originally posted by bass-coach »</td></tr><tr><td class="quote">Neil, i find that interesting. My '08 came with the 27 T1 and my max rpm's are about 5900 in February to about 5800 or a little under in the hot months. that is with it loaded too.
</td></tr></table>
I am a big boy and carry lots of tackle.![]()
.
Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO
Kerr Lake Ba$$hole
My 225 OX66 spins my 27-t1 prop at 58-5900 RPMs with no problems.![]()