I just bought a 1997 Skeeter 202. I am interested in installing a recessed trey for my trolling motor pedal. Could anyone give me suggestions as to what to watch out for. I don't want to cut a cross member and I cannot see under there. Thanks for your help!
Not sure how the front deck layout is but do you have a storage box on the front deck? If so you should be able to remove the plastic part and get access under the deck, then you can stick you head down there and check things out.
YOU are not entitled to what I have earned!!!!!
2014 Phoenix 619 Pro / 2014 Mercury 200 Pro XS
If you have a cutout in the bow for a dash panel or fish finder remove and look with a mirror or take pics with a camera.
.
Neil Eckberg- Cary, NC - 2008 Skeeter ZX250- 250 Yamaha SHO
Kerr Lake Ba$$hole
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Neilslure »</TD></TR><TR><TD CLASS="quote">If you have a cutout in the bow for a dash panel or fish finder remove and look with a mirror or take pics with a camera.</TD></TR></TABLE>If forgot that one. By the looks of other boats, it's empty/wide open space under the floor/deck.
YOU are not entitled to what I have earned!!!!!
There's a guy on here named BlackKnife that posted some very helpful pics of a TZX 190 when he did his. I would THINK yours would be similar.
Here's a link to the thread.
http://www.bbcboards.net...00658
Jeff Shepherd
2005 Chevy Silverado 4X4 Quadrasteer
2003 Skeeter TZX 190
2003 Yamaha 175 HPDI
nothing to worry about. you will hit a little wood right infront of the seat mount that was used to brase it. I used to sell comfortroll and put 20+ in Skeeters. Just measure many times and cut once.
I installed a Comfortroll in my 98 ZX202 and it fit well, didnt cut into anything making the cut
Benjamin Franklin, 1759 - "Democracy is two wolves and a lamb voting what to have for lunch. Liberty is a well armed lamb contesting the vote."
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Charger »</TD></TR><TR><TD CLASS="quote">I installed a Comfortroll in my 98 ZX202 and it fit well, didnt cut into anything making the cut
Well ya had to cut into something!!!!
2022 Skeeter ZXR 21
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by SX 180 »</TD></TR><TR><TD CLASS="quote">Well ya had to cut into something!!!!
Ya know what I mean smart-elleck
Benjamin Franklin, 1759 - "Democracy is two wolves and a lamb voting what to have for lunch. Liberty is a well armed lamb contesting the vote."
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by Charger »</TD></TR><TR><TD CLASS="quote">
Ya know what I mean smart-elleck
2022 Skeeter ZXR 21
I have installed 3 of them all in Skeeters..Mine and than I have also done them in a 05 and 06 ZX225..No problems and easy to do and you wont hit anything at all
Which brand do you recommend? Thanks!
<TABLE WIDTH="90%" CELLSPACING=0 CELLPADDING=0 ALIGN=CENTER><TR><TD>Quote, originally posted by tallman »</TD></TR><TR><TD CLASS="quote">Which brand do you recommend? Thanks!</TD></TR></TABLE>
spend the extra money for the comfortroll IMO. it's got the rounded heel. it's a little more difficult to cut, but I figure if you're gonna cut a huge hole in a perfectly good deck, you'd better be happy with what you put in it.
http://www.comfortroll.com/gallery.htm
I put a Comfortroll in my boat following the directions I found posted here by CA Ken. I could not be happier. Here is his link.
http://www.bbcboards.net...13400
Modified by kicker-fish at 11:30 AM 12/19/2008
"There is no substitute for time on the water"
Reply With Quote