Thread: Rub Rail

Results 1 to 4 of 4
  1. #1
    Member
    Join Date
    Aug 2004
    Location
    Baton Rouge
    Posts
    84

    Rub Rail

    Hey guys, the rub rail on the driver side of my boat has about 2 inches that is coming unglued from the boat. I was tied up in a idle zone and some a'hole didnt slow down and banged the boat up against the dock i was tied up to. Any thoughts on what i can use to glue it back on that will hold up in water. Any help will be greatly appreciated.

    Jimmy

  2. Member
    Join Date
    Mar 2006
    Location
    Toronto, Canada
    Posts
    209
    #2

    Re: Rub Rail (BlazinJim300)

    There's a product called GOOP available at most hardware / home improvement centres. It's available in a 'marine' and 'plumbing' version. It dries clear and has some flexibility, it should work fine.

  3. Member
    Join Date
    Jun 2004
    Location
    Hartselle
    Posts
    138
    #3

    Re: Rub Rail (BlazinJim300)

    Silicon is what I used on mine when I had the same thing happen.

  4. Member
    Join Date
    Aug 2004
    Location
    Baton Rouge
    Posts
    84
    #4

    Re: Rub Rail (Blazer210)

    Thanks for the info......

Similar Threads

  1. rub rail
    By lunker0477 in forum Ranger Boats
    Replies: 5
    Last Post: 03-01-2012, 02:37 PM
  2. Rub Rail
    By stretchs10 in forum Triton Boats
    Replies: 2
    Last Post: 12-31-2011, 07:54 PM
  3. Rub Rail
    By ratherbfishing in forum Bassboat Restoration
    Replies: 2
    Last Post: 06-01-2011, 07:44 AM
  4. Need a rub rail
    By MoStratos in forum Bassboat Restoration
    Replies: 3
    Last Post: 05-25-2011, 04:26 AM
  5. rub rail
    By br544 in forum Champion Boats
    Replies: 2
    Last Post: 03-12-2009, 08:22 AM