LOOKING FOR THE EASIEST WAY TO GET TO THE 3RD SCREW ON TILT TRIM MOTOR ON A 1989 175HP JOHNSON 6CYC TO CHANGE MOTOR?
LOOKING FOR THE EASIEST WAY TO GET TO THE 3RD SCREW ON TILT TRIM MOTOR ON A 1989 175HP JOHNSON 6CYC TO CHANGE MOTOR?
Trim the motor full up, engage motor bracket, pop tilt pin out. Remove bolts from bottom of either side of unit, run trim motor back to full down. Tilt unit towards you. remove back screw with socket. Follow replacement procedures in manual as far as fluid and bleeding process. Have fun.