Thread: Throttle Adjust

Results 1 to 2 of 2
  1. #1
    Member
    Join Date
    Jun 2008
    Location
    Natrona Heights
    Posts
    81

    Throttle Adjust

    How do I know if my throttle is adjust properly at WOT position on the vz225? I looked at the throttle cam but not sure where the cam follower needs to be at WOT. Also there is some sort of limit switch (??) on the back side of the cam near the end of travel. What is this for?

  2. Member
    Join Date
    Jan 2010
    Location
    Hemphill,Tx
    Posts
    10,527
    #2

    Re: Throttle Adjust (rickZX225)

    Remove the air silencer and move the throttle to WOT, then visually check the throttle plates for being 90 degrees to the closed position. You don't want them less than nor more than 90 degrees.

Similar Threads

  1. How do you adjust the throttle tension on a 225 Optimax?
    By Erie660 in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 1
    Last Post: 03-13-2012, 12:51 AM
  2. How to adjust throttle cable tension
    By Erie660 in forum Triton Boats
    Replies: 3
    Last Post: 03-11-2012, 07:36 AM
  3. 150 EFI throttle adjust
    By theBaitBar in forum Mercury Motors
    Replies: 6
    Last Post: 03-07-2012, 04:43 AM
  4. How to adjust the throttle cable
    By AngryChair in forum Evinrude/Johnson Motors
    Replies: 6
    Last Post: 04-07-2010, 05:58 PM
  5. adjust throttle friction
    By Dite in forum Mercury - 3 Liter & 3 Liter High Performance
    Replies: 5
    Last Post: 09-06-2008, 03:27 AM